2. Float Types Float submersion depths: In water (specific gravity of 1.00; ±0.3˝ ) PP PVC PVDF 2-9/32˝ (57.9 mm) TYP. 1-1/4˝ (31.8 mm) 11/16˝ (17.5 mm) 1-1/16˝ (26.9 mm) 2-27/32˝ (72.2 mm) DIA. TYP. LEVEL SENSORS - CONTINUOUS Maximum Pressure vs. Temperature Min. Liq. Part Material Specific 0°F 70°F 100°F 125°F 140°F 170°F 200°F 210°F Number Gravity (17.8°C) (21.1°C) (37.8°C) (51.7°C) (60.0°C) (76.7°C) (93.3°C) (98.9°C) PVC .60 61326 50 PSI 50 PSI 35 PSI 20 PSI 10 PSI - - Polypropylene .40 61327 50 PSI 50 PSI 40 PSI 35 PSI 30 PSI 25 PSI - PVDF .75 61328 50 PSI 50 PSI 45 PSI 40 PSI 35 PSI 30 PSI 25 PSI 25 PSI = Not recommended at these temperatures 3. Dimensions Typical Configuration 1-1/8 " (28.6 mm) REF. C HIGHEST LEVEL INDICATED B INCHES OF INDICATION " C " Dimension begins at point where stem meets the mounting. C C C C Float Factor - X B: Overall Length = Inches of Indication + C + X (See Table at Right) C: Distance From Bottom of Mounting to Float Stop (Customer Specified): * 3/8˝ minimum when float stop is used. * 0˝ minimum when no float stop is used. Calculating Length To find Overall Length when Inches or Indication is known: * Inches of Indication + C* + X = Overall Length To find Maximum Inches of Indication when Overall Length is known: * Overall Length - C* - X = Maximum Inches of Indication Float Part Number X 61326 3.5˝ (88.9) 61327 3.5˝ (88.9) 61328 3.5˝ (88.9) Inch (mm) *C dimension is determined by customer. LOWEST LEVEL INDICATED 4. Input/Output For XM Series, no special output designation is necessary. For XT Series, specify the desired signal conditioning by Part Number. Additional information about GEMS signal conditioning modules is found on Page C-26. Series XMP-800 XTP-800 Input Voltage Output Signal Part Number 10 to 30 VDC Proportional Voltage - 8 to 24 VDC 0-5 VDC* 51965 14 to 30 VDC 0-12 VDC* 51970 8 to 24 VDC 0-5 VDC 154687 15 to 30 VDC 0-12 VDC 154685 4-20 mA 116970 4-20 mA 112300 10 to 40 VDC Electrical Termination Lead Wires (3), #22 AWG, 24˝ (60.9 cm), Polymeric Jacket Lead Wires, #22 AWG, 24˝ (60.9 cm), PTFE Jacket Compatible Mountings Type A Type B Type C * * * * * * * * * * * * * * * * * ABS Junction Box Panel Mount with Plug-in Base * * Stem mounted. = Stock item C-17 Visit www.GemsSensors.com for most current information. XMP/XTP-800 Series / p2of3 / 30-JUL-14http://ecatalog.gemssensors.com/ecatalog/configurators/XMP800 http://ecatalog.gemssensors.com/ecatalog/configurators/XMP800 http://ecatalog.gemssensors.com/ecatalog/configurators/XMP800 http://www.GemsSensors.com