DIPTAPE INDICATORS Engineered Plastic Versions Offer Best Chemical Resistance Ordering is Easy! See Page D-27. Easy online ordering too! Temperatures to 140°F (60°C) Pressures to 50 PSI (3.4 bar) With a choice of three highly resistive, engineered plastic materials, large floats and 1/2 inch IPS stems, these DIPTAPE Indicators provide rugged durability in almost any chemical tank. For higher temperature and pressure capability, review the alloy versions on next page. 1. Mounting Types Type B 3 " NPT Note: Dimensions " A " and " C " are dependent on float selected. See Float Types below. PROTECTIVE CAP CALIBRATED INDICATOR PARTIALLY EXTENDED C** 1-1/8˝ REF. (28.6 mm) C** HIGHEST LEVEL INDICATED HIGHEST LEVEL INDICATED 1/2˝ I.P.S. .840 DIA. STEM 1/2˝ I.P.S. .840 DIA. STEM B 2-3/8˝ (60.3 mm) A** A** 3˝ (76.2 mm) DIA. 3˝ (76.2 mm) DIA. Stem and Mounting Material B INDICATING LENGTH INDICATING LENGTH 2-3/8˝ (60.3 mm) 1/4˝ REF. (6.4 mm) LEVEL INDICATORS - VISUAL " B " Dimension (Length Overall): Indicating Length + A + C Type C 3 " -150# ANSI Flange PVC, PVDF or Polypropylene 6 " to 72 " (15.2 cm to 182.9 cm) Indicating Length* 1/16 " or 1 mm increments Std. Indication Markings *For longer lengths, please consult factory. **Dimensions listed below, under " Float Types. " 2. Float Types Float Material Part Number Min. Liquid Specific Gravity PVC Polypropylene PVDF 71741 73742 73740 0.46 0.83 0.65 Operating Temperatures +40°F to +140°F (+4.4°C to +60°C) Operating Pressure, Max. 50 psi (3.4 bar) " A " Dimension (From Mounting Types) 1-3/4˝ (44.4 mm) 1-3/8˝ (34.9 mm) 2-3/16˝ (55.6 mm) " C " Dimension (From Mounting Types) 15/16˝ (23.8 mm) 1-5/16˝ (33.3 mm) 1/2˝ (12.7 mm) Eng. Plastics DipTape / p1of1 / 3-APR-14 Visit www.GemsSensors.com for most current information. D-25http://ecatalog.gemssensors.com/ecatalog/configurators/Diptapes http://www.GemsSensors.com