Chicago Residential Towers - (Page 5) SPECIAL ADVERTISING SECTION for construction management services and Murphy/Jahn as architect. As for construction details, the structure contains 3,128 curtainwall units, and 272,000 sq ft of facade area. The typical curtainwall unit is 10 ft high (floor to floor) and 6 ft 8 in. wide, mullion to mullion. The total concrete pour is 20,254 cu yds and it required 2,234 tons of rebar and 450,320 lbs of post tensioning. The cantilevered section on the north side of the project overhangs by 10 ft the building to the north, which is also owned by Schatz Development. There are glass louvers from floors 9 through 12 in the center bay of the overhang section to provide makeup air for the mechanical equipment. Difficulties that were overcome include coordination of the structural steel, ➤ Midwest Construction 5 http://www.permasteelisa-cs.com http://www.permasteelisa-cs.com
Table of Contents Feed for the Digital Edition of Chicago Residential Towers Chicago Residential Towers Chicago Residential Towers - (Page 1) Chicago Residential Towers - (Page 2) Chicago Residential Towers - (Page 3) Chicago Residential Towers - (Page 4) Chicago Residential Towers - (Page 5) Chicago Residential Towers - (Page 6) Chicago Residential Towers - (Page 7) Chicago Residential Towers - (Page 8) Chicago Residential Towers - (Page 9) Chicago Residential Towers - (Page 10) Chicago Residential Towers - (Page 11) Chicago Residential Towers - (Page 12) Chicago Residential Towers - (Page 13) Chicago Residential Towers - (Page 14) Chicago Residential Towers - (Page 15) Chicago Residential Towers - (Page 16) Chicago Residential Towers - (Page 17)
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.