JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 28

FEATURE “Wind Energy” Blade length: top-end limits are not set by the materials BASF has developed new epoxy resin systems for fibre-reinforced composites that are tailored specifically to the production of rotor blades for wind turbines. The systems increase productivity by allowing for significantly shorter cycle times. DR. GREGOR DAUN RESPONSIBLE FOR EPOXY SYSTEMS BASF, INTERMEDIATES DIVISION he boom in wind energy generation continues unabated: at the end of 2008, the total capacity of wind turbines worldwide amounted to 120 gigawatts (GW), representing an increase of nearly 30% compared to 2007. In their report “Offshore Windparks in Europe”, accountancy company KPMG concluded that the wind energy industry is currently one of the sectors showing the most dynamic growth worldwide. Eighty countries are already using wind for electricity generation. “Wind power already generates more than 1.5% of total electricity production,” reports Stefan Gsänger, Secretary General of the World Wind Energy Association (WWEA, Bonn, Germany). As in the past, Germany occupies first place, followed by the USA, Spain, China and India. These countries account for three-quarters of the installed capacity. The WWEA believes that it should be possible to fully meet the electricity requirements of the world population with wind and other renewable resources by 2040. According to Gsänger, “a rapid expansion of wind energy would be the correct answer to the current financial crunch and ongoing energy crisis.” T Wind turbine at BASF’s Verbund site in Antwerp, Belgium UpWind, which started in 2006 and will run until 2011, is following this vision. “UpWind is the flagship project for European research cooperation in the field of wind turbine development,” explains Project Manager Peter Hjuler Jensen of Risø National Laboratory (Technical University of Denmark). The new giants are intended in particular for offshore use, because the wind blows more strongly and consistently there. The length of rotor blades is increasing, since a blade with twice the length covers an area that is four times the size, and thus can capture four times as much energy. At the same time, a blade with twice the length is generally four times as heavy. Whilst a 30-m blade weighs 4 to 5 metric tons, a 60-m one weighs in at nearly 20 metric tons. In spite of these increasing weights, the technical limits have nowhere near been reached, even with the use of new materials such as carbon-fibre composites. There are design concepts for 70-m blades and test rigs for blades of up to 90 m. At around 60 m in length, the possibilities for glass-fibre reinforcement have been pretty much exhausted. Beyond this, carbon fibres are more often used, but they cost around five times as much. At the moment, two trends are dominating the development of wind energy – turbines are growing ever larger in order to generate more power at individual locations, and wind power is moving offshore. Repower and Enercon are the first manufacturers to offer 5 and 6 megawatts (MW) output, respectively. Rotor diameters are correspondingly impressive. The Repower 5M turbine has a rotor diameter of 126 m, for individual rotor blades 61.5 m long. The Enercon E-126/6 MW has similar dimensions: rotor diameter 127 m, blade length 58 m. However, these immense dimensions are apparently not the limits of what is possible. Enercon is already investigating whether, based on the E-126, 8 MW of output can be achieved. Other designers are currently considering 10, 12 or even 15 MW. The target for 2020 is 20 MW. The European project jec composites magazine / No54 January 2010

JEC COMPOSITES MAGAZINE - Issue #54 - January 2010

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #54 - January 2010

Cover
Editorial
Contents
NEWS WORLDWIDE
Companies
- Focus Aeronautics
- Jushi lets its ambitious plans out of the bag
- Dedienne Multiplasturgy Group marches on
Agenda of events
Equipment : Software
- SigmaNEST saves £70,000 in composites manufacturing
BUSINESS
Market survey
- A market with a rosy future
Niche market
- High-tech first at NASA: a crew module structure made of composite materials
Human capital
- The graduate with a degree in composite materials
FEATURE - WIND ENERGY
China
- China: No slown in global wind developments as country continues expansion
Fibre
- High-performance E6 glass fibre: Meeting the needs of the wind energy industry
Foam
- Infusion moulding structural panels
- New PET foams for wind turbine construction
Epoxy
- Blade length: Top-end limits are set by the materials
Manufacturer
- SHFRP: still limited as a player
Equipment
- Epoxy-resin infusion systems for wind-blade manufacturing
- Workflow optimization for rotor blades manufacturing
- New robotic wind-blade finishing system reduces work time by 90%
Small wind turbines
- An experimental study of rotor shapes: for small horizontal-axis wind-turbines
Maintenance
- Predictive maintenance in the wind energy industry
USERS’ PLATFORM
Composites in the world
- The world’s most environmentally friendly aircraft
- Bicycling enthusiasts can adjust bike parts themselves
- Champagne!!!
Successful partners
- High-pressure hydrogen storage tanks made by RTM
Application
- Lightweight, ultra-durable air cargo containers
- Solar Plane takes of
- First solar-powered speedboat
KNOW-HOW
Laser projection
- Recent innovations in laser templating
Nanochemicals
- LEO semi-solid resin film
Mould
- DEMOCRAT, an electrostatic process
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - Cover
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 2
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - Editorial
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - Contents
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 5
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 6
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - Focus Aeronautics
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 8
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - Jushi lets its ambitious plans out of the bag
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 10
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - Dedienne Multiplasturgy Group marches on
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 12
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 13
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - Agenda of events
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 15
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - SigmaNEST saves £70,000 in composites manufacturing
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 17
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - A market with a rosy future
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - High-tech first at NASA: a crew module structure made of composite materials
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - The graduate with a degree in composite materials
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 21
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - China: No slown in global wind developments as country continues expansion
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 23
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - High-performance E6 glass fibre: Meeting the needs of the wind energy industry
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 25
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - Infusion moulding structural panels
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - New PET foams for wind turbine construction
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - Blade length: Top-end limits are set by the materials
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 29
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - SHFRP: still limited as a player
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - Epoxy-resin infusion systems for wind-blade manufacturing
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - Workflow optimization for rotor blades manufacturing
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 33
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - New robotic wind-blade finishing system reduces work time by 90%
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 35
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - An experimental study of rotor shapes: for small horizontal-axis wind-turbines
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 37
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 38
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 39
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - Predictive maintenance in the wind energy industry
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 41
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - Champagne!!!
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - High-pressure hydrogen storage tanks made by RTM
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - Lightweight, ultra-durable air cargo containers
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - Solar Plane takes of
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - First solar-powered speedboat
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 47
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - Recent innovations in laser templating
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 49
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 50
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 51
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 52
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - LEO semi-solid resin film
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 54
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 55
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - - DEMOCRAT, an electrostatic process
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 57
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 58
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 59
JEC COMPOSITES MAGAZINE - Issue #54 - January 2010 - 60
https://www.nxtbook.fr/newpress/jeccomposites/jcm2211_148
https://www.nxtbook.fr/newpress/jeccomposites/jcm2209_147
https://www.nxtbook.fr/newpress/jeccomposites/jcm2206_146
https://www.nxtbook.fr/newpress/jeccomposites/jcm2204_145
https://www.nxtbook.fr/newpress/jeccomposites/jcm2201_144
https://www.nxtbook.fr/newpress/jeccomposites/jcm211_143
https://www.nxtbook.fr/newpress/jeccomposites/jcm2109_142
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com