JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 52

process

Fig. 4: Modular layout of the installation

Fig. 2: Flexibility compared to productivity for different manufacturing methods

production methods such as pultrusion or PRTM do not allow the
manufacture of tapered designs or fast design changes (e.g. changed
lay-ups). Even the systems engineering can be considered more
costly [3,4,5].
To keep the initial costs low, it was decided to develop a semi-automated method for the manufacture of preforms for beams with the
following characteristics:
- high productivity and accurate repeatability through
semi-automation of the process chain,
- efficient material usage and reduced waste due to almost
net-shaped manufacturing of preforms.

Development of a beam preform
manufacturing concept
The development process was conducted according to guideline
VDI 2221 [6]. At first, ideas were collected and combined for rough
manufacturing concepts. After an evaluation phase, the final concept
needed to be designed, deciding whether to move the foam core

through stationary machines or to keep the foam core stationary.
Another consideration was made between contact-free binder activation versus ironing. The installation has a modular layout.
The main objective was to handle a foam core/preform 60 x 250 x
10,000 mm in size, taking into account a lack of inherent stability.
The foam core would be moved through each of the modules. The
translational feed and the rotation of the foam core will be achieved
by means of toothed belts driven by servo motors. The beam chords,
consisting of bindered UD fibre material, will be applied offline on
a desk. This requires a separate step to join the chord preforms with
the foam core using a liquid spray adhesive. Binder activation is done
by ironing.
To enhance the stability of the foam core during processing and
handling, it will be stiffened by braced tubes. This will enable precise
lay-up. The ±45° layers are applied by a winding process. The angle
of the winding process will be adjusted by electronically coupling the
servo motors. Figure 5 provides an overview of the entire manufacturing process.

Technical preparation
In the following section, the actual design of each module of the
facility is described in detail. Aluminium profiles are used as the
main construction material because they provide notches so that
modifications can be made easily. The whole installation consists of 3
modules: (1) Module 1, (2) Main frame and (3) Module 2.
Module 1

Fig. 3: Beam structure

Fig. 5: Schematic manufacturing

52 jec composites magazine / No92 October - November 2014



Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014

Cover
Edito
Point of view: oil & gas
Contents
COMPANY & BUSINESS In Brief
Recycling
Biocomposites
Spin-off
Agenda of Events
APPLICATIONS
Sustainability
Defense
Automotive
MARKET
Biocomposites
Inside the factory
SPECIAL JEC AMERICAS - FALL EDITION
Gain insight into the JEC 2014 I.C.S. Americas Program
JEC Americas Innovation Awards Program
Maintenance - Certified composite repair system for pipelines
Carbon fabrics - Successful first flight test for the VX-1 KittyHawk C-PlyTM aircraft model
Design - Composite aerostructure development in high-performance enterprises
RESEARCH & DEVELOPMENT
Reinforcement
Process
TECHNOLOGY & INNOVATIONS
NDT
Tooling
Infusion
Index
In the world
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Cover
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 2
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Edito
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Point of view: oil & gas
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 5
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Contents
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 7
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - COMPANY & BUSINESS In Brief
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Biocomposites
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Recycling
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Spin-off
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 12
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 13
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Agenda of Events
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Ad1
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Ad2
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 15
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Sustainability
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 17
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 18
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 19
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Defense
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 21
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Automotive
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Biocomposites
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 24
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 25
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 26
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 27
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Inside the factory
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 29
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 30
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - SPECIAL JEC AMERICAS - FALL EDITION
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Gain insight into the JEC 2014 I.C.S. Americas Program
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 33
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 34
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 35
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 36
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - JEC Americas Innovation Awards Program
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 38
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 39
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 40
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 41
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Maintenance - Certified composite repair system for pipelines
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Carbon fabrics - Successful first flight test for the VX-1 KittyHawk C-PlyTM aircraft model
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Design - Composite aerostructure development in high-performance enterprises
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 45
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 46
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Reinforcement
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 48
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 49
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 50
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Process
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 52
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 53
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 54
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - NDT
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 56
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 57
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Tooling
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 59
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 60
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 61
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Infusion
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 63
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 64
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - Index
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - In the world
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 67
JEC COMPOSITES MAGAZINE - Issue #92 - October/November 2014 - 68
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
http://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
http://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
http://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
http://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
http://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
http://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
http://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
http://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
http://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
http://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
http://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
http://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
http://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
http://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
http://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
http://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
http://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
http://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
http://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
http://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
http://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
http://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
http://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
http://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
http://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
http://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
http://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
http://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
http://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
http://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
http://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
http://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
http://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
http://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
http://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
http://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
http://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
http://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
http://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
http://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
http://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
http://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
http://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
http://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
http://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
http://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
http://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
http://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
http://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
http://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
http://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
http://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
http://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
http://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
http://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
http://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
http://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
http://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
http://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
http://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
http://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
http://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
http://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
http://www.nxtbookMEDIA.com