Dental Lab Products - April 2009 - (Page 23)

FORWARD ZAHN DENTAL //// PRESSED VENEERS Trends Noritake EX-3 Press Indicated for pressing all-ceramic veneers, inlays, onlays, and full crowns for use in combination cases, Noritake EX-3 pressable system also is indicated for pressing single crowns and longspan bridges over metal. With a CTE of 12.6, the system is compatible with a wide variety of alloys and offers exceptional handling characteristics and natural ﬂuorescence and opalescence. It is offered in 24 shades of ingots plus four bleach shades and in two opacity levels: High Translucency for staining and Low Translucency for layering. 800-496-9500 | www.zahndental.com TALLADIUM INC. Luminesse Pressable System Luminesse third-generation pressable porcelain is a highly versatile, low-fusing glass ceramic with a low ﬁring temperature for use alone for esthetic all-ceramic restorations in the anterior using the stain-and-glaze technique or for pressing over conventional alloys. The system is indicated for fabricating veneers, inlays, onlays, all-ceramic crowns and porcelain-pressed-to-metal crowns and bridges. 800-221-6449 | www.talladium.com PENTRON CERAMICS Avanté Press.tige Formulated for pressing as thin as 0.3 mm for no-prep/minimal-prep veneers, Avanté Press.tige leucite-based ceramic combines high strength (165 MPa) with exceptional esthetics. The pellets can be pressed in any conventional pressing furnace for veneers as well as full-contour crowns, inlays, and onlays. The system includes six pellet shades, three body porcelains, three opal incisals, buildup liquid, glaze, and glaze medium. 800-496-9500 | www.pentronceramics.com GLIDEWELL DIRECT DENTSPLY PROSTHETICS Prismatik ThinPress Prismatik ThinPress leucite-reinforced pressed ceramics feature a flexural strength of 167 MPa. Blended with body and color modifiers, the ceramic ingots are offered in 10 thick and thin shades. The thin shades are used for no-prep or minimal-prep cases, while the thick shades are suitable for standard veneers and full crown preparations. Seven shades of correction powders also are available. Starter and trial kits containing ingots; correction, layering, stain, and glaze powders; universal stain and glaze liquid; and build-up liquid are available. 888-303-6470 | www.glidewelldirect.com Finesse All-Ceramic Composed of leucite-reinforced glass-ceramic, Finesse All-Ceramic press ingots can be used for veneers, inlays/onlays, and single crowns to the second bicuspid. Pressed restorations are fully compatible with the Finesse low-fusing porcelain, which offers stability, wear kindness, uniform ﬂuorescence, opalescence, and characterization options. With a ﬂexural strength of 125 MPa for single units, they can be used in the smile line and adhesive bonded in place. 800-243-1942 | prosthetics.dentsply.com dlpmagazine.com April dentallabproducts 23 http://www.zahndental.com http://www.talladium.com http://www.pentronceramics.com http://www.glidewelldirect.com http://prosthetics.dentsply.com

Table of Contents Feed for the Digital Edition of Dental Lab Products - April 2009

Dental Lab Products - April 2009 Contents From the Editor Product Watch New Face of Veneers Veneer Venue Chairside Metal Here and Now Seamless Integration Pressing Versatility Pinless Duplication The Fine Art of Delegating City of Big Ideas Spring Forward Industry News Easy Does It Art of Articulation Classifieds The Perfect Storm

Dental Lab Products - April 2009

For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.