Dental Lab Products Tech Guide 2008 - (Page 66) techtoday CAD/CAM // NON-CAD Zahn Dental C. Hafner The economical C. Hafner CeHa ECS unit employs an electrophoretic deposition process to deposit ceramic particles onto a die, creating a VITA InCeram alumina framework in less than 2 minutes. Ceramic slurry is premixed and transferred to the unit, then the die is submerged into the slurry and withdrawn, creating the coping. Schick Dental Z-System The compact, economical Z-System zirconia copymilling unit uses C3 motor technology with a high-precision, hightorque chuck for smooth operation; it integrates the touch spindle and milling spindle side-by-side on the same arm. It also includes a blow-out hose, proprietary LED lighting integrated into the spindles, and an integrated armrest. Schütz Dental Group TiZian Mill Described as easy to learn and operate, the TiZian Mill copymilling unit produces frameworks for single copings, bridges up to 16 units, and implant abutments out of pre-sintered TiZian zirconia milling blocks in six different shades. Milling takes just 15 minutes per unit. The device compensates for sintering shrinkage during the milling process. 800-496-9500 www.zahndental.com Select 66. 800-921-3177 www.schickdentalusa.com Select 65. 866-922-1484 www.sdginnovations.com Select 64. Human Zirconium Technology THE INVENTOR CERAMIC OVEN 00 $3,250. This Zirkonzahn ceramic oven has been especially designed for ceramics used on zirconia. It features 98 programs. Eight of them are preprogrammed for Zirkonzahn ICE Zirconia Ceramics. There are also some special programs for big bridges. All other programs are for your own use. This oven is delivered with the vacuum-pump. ZIRKONZAHN USA Inc. - T 1-800-989-8931 - T 678-441-9419 - infousa@zirkonzahn.com - www.zirkonzahn.com 66 techguide2008 dentallabproducts Use 170 on card or at www.dlpmagazine.com http://www.zahndental.com http://www.schickdentalusa.com http://www.sdginnovations.com http://www.zirkonzahn.com http://www.zirkonzahn.com http://www.dlpmagazine.com
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.