ASHRAE Publications Catalog - Winter 2016 - (Page Cover1)
ASHRAE
LABORATORY
DESIGN GUIDE
Planning and Operation of
Laboratory HVAC Systems
Expert Guidance on Cold-Climate Challenges
USER'S MANUAL
Buildings in arctic and subarctic climates face unique challenges, not only the cold,
but also remoteness, limited utilities, permafrost, and extreme temperature shifts.
Built structures must meet these challenges while maintaining occupant comfort and, if
possible, minimizing impact on the environment. Harmonizing human comfort with the
climatic realities of these environments can be a delicate balancing act. Strategic design
is key to building, commissioning, and operating efficient and long-lasting cold-climate
structures. This unified guide to cold-climate design provides expert knowledge on the
issues commonly faced in arctic and subarctic climates.
ANSI/ASHRAE/USGBC/IES
In addition to cold-climate considerations in HVAC calculations and system design, this book's
chapters cover sustainability, controls, building design, and commissioning, all from this
distinctive climatic perspective. The book also includes an appendix with seven case
studies of buildings located in cold and extreme cold climates. These buildings are
leaders in their field with regard to both efficiency and cold-climate design.
STANDARD 189.1-2014
Cold-Climate Buildings Design Guide
Aimed at each member of the building team, from the designer and architect to the
commissioning authority, Cold-Climate Buildings Design Guide will serve as a valuable
resource from the initial planning to completion of cold-climate buildings.
This publication funded in part with support from:
ANSI/ASHRAE Standard 188-2015
Legionellosis:
Risk Management for
Building Water Systems
ISBN 978-1-939200-00-6
1791 Tullie Circle
Atlanta, GA 30329-2305
Telephone: 404-636-8400 (worldwide)
STANDARD FOR THE DESIGN
OF HIGH-PERFORMANCE
GREEN BUILDINGS
EXCEPT LOW-RISE RESIDENTIAL BUILDINGS
Comprehensive guidance on
Cold-Climate Buildings
Design Guide
* All aspects of HVAC systems for laboratories (loads, equipment,
processes, air treatment, exhaust stack design, airflow, and balancing)
* Designing for energy efficiency and sustainability
* Initial and life-cycle costs
* Operation and maintenance for safety and efficiency
* Commissioning for laboratory systems
Includes access to bonus digital tools for learning and design
sustainability * controls * commissioning * case studies
Includes online access
to compliance forms
and calculators
9 781939 20000 6
Approved by the ASHRAE
Standards Committee on May 27, 2015; by the ASHRAE Board of Directors onProduct
June 4, 2015;
and90136
www.ashrae.org
code:
by the American National Standards Institute on June 26, 2015.
STANDARD
189.1-2014
9/15
This Standard is under continuous maintenance by a Standing Standard Project Committee (SSPC) for which the Standards
Committee has established a documented program for regular publication of addenda or revisions, including procedures for
timely, documented, consensus action on requests for change to any part of the Standard. The change submittal form,
instructions, and deadlines may be obtained in electronic form from the ASHRAE website (www.ashrae.org) or in paper
form from the Senior Manager of Standards. The latest edition of an ASHRAE Standard may be purchased from the
ASHRAE website (www.ashrae.org) or from ASHRAE Customer Service, 1791 Tullie Circle, NE, Atlanta, GA 30329-2305.
E-mail: orders@ashrae.org. Fax: 678-539-2129. Telephone: 404-636-8400 (worldwide), or toll free 1-800-527-4723 (for
orders in US and Canada). For reprint permission, go to www.ashrae.org/permissions.
© 2015 ASHRAE
ISSN 1041-2336
WINTER 2016
http://www.ashrae.org
http://www.ashrae.org
http://www.ashrae.org
http://www.ashrae.org/permissions
http://www.ashrae.org/bookstore
Table of Contents for the Digital Edition of ASHRAE Publications Catalog - Winter 2016
ASHRAE Publications Catalog - Winter 2016
https://www.nxtbookmedia.com