AWCI’s Member Products Catalog 2017 - PhM4

TAPERED FLANGES ALLOW FOR
SEAMLESS FINISH WORK
PHILLIPSMFG.COM/BEADS

gripSTIK® Vinyl Corner and Transition Caps and Corner Beads
PHILLIPS CORNER AND TRANSITION CAPS
Phillips gripSTIK® 1/2", 3/4" and 1-1/2" 3-way corner is designed to easily finish three intersecting
90° outside corners. This product eliminates the need for mitering and corner filling, saving time and
reducing waste. Bullnose and splay have alignment tabs making it easier to match with Phillips metal,
vinyl or paper faced metal bullnose corner beads. Perforated to enhance mud adhesion. This product
is available in bullnose, square and splay which easily finishes where two 90° outside bullnose
corners intersect with one outside bullnose splay corner.
Phillips gripSTIK® 3/4" and 1-1/2" 2-way corners finish two intersecting 90° outside bullnose
corners. This product works great to cap corners of windows, closets, doorways, skylights, and
other areas. Perforated to enhance mud adhesion. Alignment tabs make it easy to match with Phillips
metal, vinyl or paper faced metal bullnose corner beads. This product is also available in splay.
Phillips gripSTIK® transition caps are designed to eliminate gaps between bullnose corner bead and
baseboard or crown molding by transitioning bullnose corners to 90° corners. Phillips transition caps
install quickly and easily using standard industry practice and can be used with Phillips metal, vinyl or
paper faced metal corner beads. Perforated to enhance mud adhesion.
Additional sizes and profiles available.

PHILLIPS VINYL CORNER BEADS
Phillips gripSTIK® corner beads provide a rigid protection for the exposed edges of
wallboard. This easy to install corner support can be nailed, stapled, or installed with a
high tack spray adhesive. Flanges feature many perforations and deeply knurled mud
anchors for excellent joint compound adhesion. All Phillips' vinyl products are specially
textured to enhance paint and mud adhesion and work great for both drywall and
interior veneer applications.

1-1/4" x 1-1/4"

For 90˚ Angles

The standard 90° square corner bead flange length for this product is 1-1/4".
Phillips extra wide corner bead flange length of 1-5/8" is ideal for those times a longer
flange is needed or desired.
1-1/4" x 1-1/4"

Phillips splay bead offers a flush fit on a variety of open angle applications from
approximately 120° to 135°, making this a very versatile product. The standard flange
length for this product is 1-1/4"

Open Angle

PHILLIPS MAX-Flex ® ARCHWAY CORNER BEADS
Phillips gripSTIK® MAX-Flex® vinyl archway beads are designed for maximum
flexibility as our unique design allows them to conform to almost any radius. These
products features many perforations, deeply knurled mud anchors, and the entire
product is specially textured which all greatly enhance paint and mud adhesion. It
is recommended to use high tack spray adhesive on each tab of the notched flange,
possibly in conjunction with either nails or staples, for quick and easy installation.

Notched
Flange

1-1/4" x 1-1/4"

For 90˚ Angles

Phillips gripSTIK® 3/8" MAX-Flex® bullnose archway (mini) and square corner bead
cuts feature 'Y' shaped slits on the notched flange allowing for ultimate flexibility
without kinking. The standard flange length for the square corner bead is 1-1/4".
Phillips gripSTIK® 3/4" and 1-1/2" MAX-Flex® bullnose archway beads are designed
for a modern look. These products features a straight-cut design for minimal fill-in.

1-1/2" Radius

Notched Flange

3/4" Radius

1"
3/8" Radius
For 90˚ Angles

7/8"
7/8"

http://www.PHILLIPSMFG.COM/BEADS http://phillipsmfg.com

Table of Contents for the Digital Edition of AWCI’s Member Products Catalog 2017