AWCI’s Member Products Catalog 2017 - VC10

10

Accessory Specifications
1. PRODUCT NAME

RIGID VINYL ACCESSORIES
FOR MANUFACTURED STONE VENEER
Rigid Vinyl also known as PVC
(Unplasticized Polyvinyl Chloride)

2. MANUFACTURER
Vinyl Corp.
8000 NW 79th Place
Miami, Florida 33166
Phone: 305-477-6464
Fax: 305-477-4108
Toll-Free: 800-648-4695

3. PRODUCT DESCRIPTION

Manufactured stone veneer accessories are
manufactured by Vinyl Corp., using exterior grade,
lead-free, vinyl compounds, formulated and tested
for exterior use.
Manufactured Stone Veneer Accessories:
Colored Exterior Vinyl Parts, BackerBead,™ Casing
Bead, Drip Flashing, Weep Screed.
Weatherability: Rigid vinyl compounds used
by Vinyl Corp. are formulated to withstand the
elements. Physical properties and color are not
adversely affected by exposure to ultraviolet (UV)
light from the sun. Vinyl Corp. accessories do not
contain plasticizers which could migrate to the
surface, and are designed and manufactured
to perform in cold or warm climates and in
locations where sudden large temperature
changes are encountered.
Corrosion Resistance: Vinyl accessories are
impervious to rust, corrosion, galvanic corrosion,
electrolysis, corrosive coastal areas, and are not
affected by masonry cement additives, magnesium
oxychloride cements, or calcium chloride additives.
Solid Color: Standard colors are gray, tan, brown
and white. Custom colors are available.
Paint Adhesion Properties: Excellent, no priming
is required.
Ignition Resistance: Rigid vinyl is self-

extinguishing, and will not continue to support
combustion once flame source is removed;
therefore it will not cause a fire to restart or spread.
It offers better resistance to burning than many
other common building materials.
Electrical Conductivity: Rigid vinyl possesses
low electrical conductivity.
Thermal Conductivity: Rigid vinyl has a very low
transmission of heat and cold. PVC is considered
an excellent insulator.
Expansion and Contraction: Some Vinyl Corp.
stone veneer accessories are manufactured with
perforations in the flanges to allow mortar to flow
through and anchor to substrate. Accessories may
have hooks in critical areas to assure embedment
in mortar. These factors, along with the fastening of
accessories to substrate prior to coating, make the
accessories part of the building unit and therefore
will move with it as the temperature changes.
Consequently, the coefficient of expansion of rigid
vinyl has little or no bearing on the installation.
Basic Uses: To produce durable straight lines,
smooth curvatures, terminate cementitious or
dissimilar materials, relieve moisture from exterior
walls, provide flashing and drainage, and protect
corners and edges.

Masonry Veneer
ASTM C1063 - Standard Specification for
Installation of Lathing and Furring to Receive
Interior and Exterior Portland Cement-Based
Plaster
Installation shall be in accordance with ASTM
standards and prevalent industry standards
and good practices, or specific stone veneer
manufacturer's instructions. Vinyl accessories shall
be fastened by the use of mechanical attachment
to the substrate in straight lines or smooth curves,
flashing and/or drainage.
All butt joints, intersections, ends and corners shall
be caulked & sealed at time of installation using a
high-performance sealant designed for this use.
Consult sealant manufacturer or Vinyl Corp. for
specific recommendations.
Limitations: Contact Vinyl Corp for specific
limitations regarding extreme operating temperatures.

4. TECHNICAL DATA

7. PACKAGING

Applicable Standards:
ASTM D1784 - Standard Specification for
Rigid Poly(Vinyl Chloride) (PVC) Compounds
and Chlorinated Poly(Vinyl Chloride) (CPVC)
Compounds
ASTM D4216 cell class 13244C - Standard
Specification for Rigid Poly(Vinyl Chloride) (PVC)
and Related PVC and Chlorinated Poly(Vinyl
Chloride) (CPVC) Building Products Compounds

5. INSTALLATION

6. AVAILABILITY AND COSTS

Vinyl Corp. accessories are in-stock and will
usually be shipped within 24 hours after receipt
of order. Accessories are marketed nationwide
through distributors and building supply dealers
coast-to-coast.

275 lb. test, double wall, corrugated boxes.
Piece counts vary according to item. Verify at
www.vinylcorp.com or your catalog.

8. WARRANTY INFORMATION
Available upon request.

Note: All size references are nominal dimension
and subject to normal manufacturing tolerances.
All product lengths are 10' unless otherwise stated.

Applicable Standards:
ASTM C1780 - Standard Practice for Installation
Methods for Adhered Manufactured Stone

Material Data
MINIMUM PROPERTIES

ASTM

@0ºF

@320ºF

@72ºF

Tensile Strength, psi

D638

8,100

7,500

5,900

Tensile Modulus, psi

D638

425,000

400,000

360,000

Flexural Strength, psi

D790

16,500

14,600

11,200

Flexural Modulus, psi

D790

497,000

470,000

415,000

Izod Impact (ft.-lbs./in.)

D256

1.1

1.6

3.4

MISCELLANEOUS MINIMUM PROPERTIES

ASTM

@72ºF

Heat Distortion Temperature (ºF @ 264 psi)

D648

160

D696

3.45

Coefficient of Linear Thermal Expansion
(in./in. ºF x 10-5)
Durometer "D" Hardness

78 +- 3

Specific Gravity

1.46
http://www.vinylcorp.com
Table of Contents for the Digital Edition of AWCI’s Member Products Catalog 2017
