BE Magazine Volume 5, Issue 2 - (Page 19) products as possible without giving it much thought. To Meza, practicing sustainability means adding an extra layer of scrutiny to every decision you make about your building. That’s not to say that purchasing green products, abiding by green-cleaning standards, and recycling assets at the end of their useful lives isn’t sustainable—without a doubt, carrying out these tasks is good for the environment, your tenants/occupants, and, oftentimes, the bottom line. But sustainability is also about something more. “So much of it isn’t really about whiz-bang work well, you’re taking a scientific or systematic approach to find the best combination of strategies,” says Scott. Sustainability starts with climate Simply put, green strategies are green because they work with surrounding climatic and geographic conditions instead of against them. With that description in mind, Meza points out that you have to know about the environment in which you’re designing and building to know whether or not you’re truly being green. “It has to do with being Sustainability strategies work with climatic and geographic conditions instead of against them. products. It’s about using the basic building blocks we all have, but using them in a much more intentional way,” says DiNola. Before jumping on the green bandwagon, take time to research what will work best for your building and provide the best return on investment. Instead of buying into the myths that can sink your efforts to be sustainable, do some investigating on your own so that you’ll be able to weigh your options and make the right decisions. When there is no time designated to sorting through the variety of sustainable technologies, it’s often a decision that’s made at the last minute. Whether it’s new construction or a renovation, the project team ends up scrambling to find products and materials that will ‘green things up.’” What if you used a different type of window glazing? What if you added shading devices to the exterior or put more insulation in the roof? Scott emphasizes that testing your options via energy modeling and design analysis before installation allows you to understand how they will work with the building’s surrounding climate and existing equipment. Maybe the shading devices and extra insulation you want to add will allow you to downsize the boiler or chiller—there’s no way to truly know how systems will affect each other unless you do some research in advance. “Seeing how things work interactively means that you’re not just making a gross assumption about what may or may not in sync with the conditions that you’re given and using them to your advantage.” To achieve the ultimate in sustainable design, you should be familiar with yearround weather conditions (average temperature, humidity, rainfall, etc.), topography, prevailing winds, indigenous plants, and so on. “All of that goes into what makes a building green, so sustainability has to be based on where you are. Measuring the success of sustainable design involves comparing building performance to a baseline condition. That baseline condition has everything to do with where your building is located and what your climate is like,” says Meza. In addition to understanding your surrounding climate, Chris Jarrett, associate professor and associate director at Atlantabased Georgia Institute of Technology’s College of Architecture, says that understanding microclimates—variations within a city, county, or state—is also crucial. “Even in terms of hot/arid and hot/humid climates, microclimates also need to be determined, because they do exist.” Brad Nies, director of Kansas City, Mo.based BNIM Architects’ sustainable design consulting division, Elements, emphasizes that you also need to identify and reduce your building’s need for resources that are scarce (water and energy, perhaps) and increase the use of abundant, available resources (sun, rainwater, wind, and so on). Knowing the climate also means knowing what’s being provided to you for use: the sun for heating and lighting, the wind for ventilation, and the rainwater for irrigation and other water requirements. When talking sustainability, it’s common to look at five areas: site conservation, water conservation, energy efficiency, materials conservation, and the indoor environment (a universal list, modeled after the Washington, D.C.-based U.S. Green Building Council’s LEED rating system). Of these five subjects, two (the indoor environment and materials conservation) are almost entirely independent of climate—they’re important and relevant everywhere. Site conservation does depend on climate, but on a level that’s very specific to a particular site and to the ground on which your building is sitting. The last two areas (water conservation and energy efficiency) both vary, depending primarily on the climate. Each U.S. region has a different climate: If you don’t understand which resources are readily available and which aren’t, and you use the wrong technique in the wrong location, costs will inevitably increase, which is something you want to avoid. No matter what your location, your buildings have the opportunity to take advantage of the surrounding environment. Although certain areas of the United States are gaining attention for their environmental projects, success in sustainability is possible anywhere. In fact, as DiNola points out, “When you have greater climate extremes, you have even better opportunities for savings.” This article was originally published in Buildings Magazine, March 2007, and can be found on the publication’s Web site, www.buildings.com. Copyright 2007 Stamats Buildings Media Inc. All rights reserved. Reprinted by permission. Leah B. Garris is senior associate editor at Buildings About Leah B. Garris Magazine and has been with the editorial team since July 2002. A University of Iowa journalism/psychology graduate, she is responsible for writing and coordinating articles about lighting and energy/engineered systems, as well as a variety of other topics. Volume 5, Issue 2 | BE MAGAZINE 19 http://www.buildings.com
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.