Appliance Design - September 2007 - (Page 67) DECORATION ing a safety label, ANSI Z535.4 standards indicate it can be laid out in either a portrait (vertical) format or in a landscape (horizontal) format. (See Fig. 1.) Both of these orientations are acceptable design layouts. This is something that can be determined by a manufacturer’s corporate standards, the area where the label will go or personal preference. Whether the label is vertical or horizontal in orientation, overall design consistency must be maintained. Through label design consistency, manufacturers will help ensure the recognition of hazard and avoidance pictorials by using the same pictorials outlined in ANSI and ISO stylebooks. It also ensures that a consistent message is delivered across entire product lines and between different products. When looking at a label program from both an international and domestic standpoint, consistency of design is very important. It is a good practice to keep layout styles consistent across different labels. Generally, manufacturers want to keep the signal word panel, the pictorials and the verbiage in the same location within various labels when possible. This will allow the end user to recognize a safety message quickly. any special instructions to the supplier. In addition, while there are no set standards for the type of material on which the label should be printed, there are special conditions that should be considered by the manufacturer. It is recommended to inform the supplier if the label will be exposed to extreme conditions such as high heat, abrasion, chemicals, long-term exposure to the sun or other harsh climate conditions. All of these factors will play a role in determining which adhesive, base material and over-laminate (if applicable) are optimal. Other issues to be addressed with the supplier involve the surface to which the label is being applied. Is it curved or flat? Is the surface painted, powder-coated or plastic? Does it have a smooth or rough texture? A good supplier should be willing to work with the manufacturer throughout the entire label development process, offering full design capabilities, translation services, and a thorough knowledge of industry standards and compliance requirements. < For more information, enter number. . . . . . . . . . . 306 Design and production Once all of the elements are in place — pictorials, verbiage and consistency — designers should take a final look at the safety label to make sure the artwork is clean and that the label accurately describes the hazard and avoidance steps. It is also a good idea to test the label by gathering a group of people to critique the label on symbol recognition and messaging. During this testing, it is important for manufacturers to remember that safety labels are not a panacea for hazard identification. The labels are there to remind the users of what they should have already reviewed in the Operators Manual. It is always the responsibility of the user to read the manual before operating any piece of equipment. After the label passes the test, designers should work with a proven label supplier to produce the finished product, making certain to provide size requirements and Richco’s new break-away bumper features a removable mounting tab that provides for easy installation. Features • Easy pull-through assembly • Break-away mounting tab • Shock absorbing Silicone rubber • Temperature resistant to 482°F (250°C) Benefits • Absorbs shock • Saves space • Anti-skid/anti-marking • Maintains aesthetics on chassis • No adhesives Richco World Headquarters • 8145 River Drive • Morton Grove, IL 60053 For more Information Enter 145 AD09074Rich1.indd 1 www.applianceDESIGN.com www.richco-inc.com 8/7/07 2007 67 September 11:58:41 AM applianceDESIGN http://www.richco-inc.com http://www.richco-inc.com http://www.appliancedesign.com
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.