Appliance Design - September 2007 - (Page 88) NEW PRODUCTS UL recognition, CSA and VDE approvals; and EU RoHS compliant construction. Enter 312 or email: rbright@interpower.com Phihong USA Quail Electronics Piggyback power cord allows user to tap into AC power outlet while still maintaining the usability of the outlet for another plug. The cord is available in shielded or unshielded versions. The cord has UL and C-UL approvals and are RoHS Compliant. It comes with a 5-15 piggyback plug and a standard IEC-60320-C13 connector. Additional and custom configurations are available. Enter 310 or email: sales@quail.com The PSC20R Series is a CEC-compliant 20 W adapter with four interchangeable clip adapter plugs that provide virtual worldwide compatibility, which simplifies inventory and approvals by allowing a single part number to be used. The adapter features no-load power saving and a low leakage current of 0.25 mA. AC input voltage ranges from 90 VAC to 264 VAC. DC output is available in 12 V, 18 V, and 24 V. The adapters are suited for computer peripherals, network equipment, gaming devices, and retail POS equipment. Enter 315 or email: usasales@phihongusa.com Tyco Electronics The 4.2 mm PE series connector system has added vertical headers for blind-mating situations. Using these headers, designers can create a system where exact positioning of mating connectors is aided by the funnel lead-in of the housing to permit easier alignment and mating in wire-to-board applications. This provides designers with an increased level of flexibility when designing power and signal connections in low-cost products. The connector system is based on 4.2 mm x 4.2 mm centerlines. The headers are available in even position sizes, ranging from 2 to 24. The components are suitable for a wide range of applications including household appliances, computers, vending machines, and power supplies. Enter 313 or email: newproducts@tycoelectronics.com Schurter The Series 1601 high-current appliance inlet is designed for PCB mounting to help reduce costly wiring and provide economic and efficient installation. The 1601-X-4460-A-20 has three PCB terminals and an additional 6.3 mm quickconnect at the ground terminal. The 1601-X4460-A-29 also offers additional 6.3 quick-connects at L and N. The combination of PCB and quick-connect terminals offers multiple connection possibilities. Enter 311 or email: info@schurterinc.com ETCO Custom, overmolded lead frames combine different technologies to create a single, rugged, integrated part that offers superior flex and strain relief, high reliability, assembly efficiency, and reduced costs. The technology allows OEMs to simplify their designs by using a single stamped piece. The lead frames can be made from virtually any alloy, including stainless steel, copper, titanium, and platinum. Enter 316 or email: jmacaluso@etco.com ITT Electronics Integrated, modular stacking solution can reduce the number of separate power and signal connectors. The connectors have seven machined contacts, with each capable of handling 15 A, providing a series of stackable modules that can eliminate up to five separate proprietary power and signal cable connectors. The environmentally sealed interconnect provides designers with a compact and cost-effective solution for electrically powered equipment such as powered wheelchairs and hospital and home-care beds. Gold-plated contacts can be either terminated to cable cores connected within the module, or as feed-through contacts to allow power or signal to be routed to another module/cable in the stack. Contact geometries can also be staggered. Enter 314 or email: allene.macklin@itt.com W.L. Gore & Associates Internally ruggedized medical cable provides high level of durability while remaining lightweight and flexible. The technology improves resistance to crushing, twisting, and kinking and is designed for use where floor contact, caster rollover, or cable torque is possible. The cable design provides reliable video and electrical performance in video endoscopy and powered surgical procedures. Other potential applications include foot switches and general powered medical devices. Enter 317 < www.applianceDESIGN.com Interpower The line of IEC 60320 filtered inlets and outlets are intended for computer, medical, general purpose, and custom indoor equipment applications. They have ratings from 6 A to 20 A and either 120 VAC or 250 VAC. Features include an IEC 60320 class I inlet or outlet; robust screw mount; nickel-plated, shielded enclosure; 6.35 mm (0.25 in.) quick-disconnect terminals; general purpose filter or medical, low-leakage filter; 88 applianceDESIGN September 2007 http://www.appliancedesign.com
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.