Appliance Design - December 2007 - (Page 15) NEW PRODUCTS Control (FOC). Additionally, it serves spaceconstrained motor control applications via 20- and 28-pin packages as small as 6 mm x 6 mm. Specific motor-control hardware features of the DSC family include a Motor Control PWM with two independent clock sources for advanced motor control algorithms and active power factor correction using a single DSC, and an Analog-to-Digital Converter (ADC) optimized for motor control applications. The on-chip ADC and Motor Control PWM are also useful for power-conversion and LEDlighting applications. Enter 314 Or email: steven.marsh@microchip.com metric sizes. It features moisture absorption of 1.4 percent maximum at 73 DegF, resistance to flex fatigue, tight dimensional tolerances, lightweight with excellent bend radii and pressure ratings, and resistance to corrosion, abrasion, crushing, cracking, and brittleness. The company stocks Nylotube in the nylon-12 formulation and offers nylon-11 on a limited basis. Some nylon-11 types are produced with FDA-approved ingredients. Both versions can be used in temperatures ranging from –90 DegF to 212 DegF. Enter 316 Or email: info@newageindustries.com MEGA ELECTRONICS INC. The NEMA Locking 7/15P plug is rated 15A, 277V for 2-pole, 3-wire applications, and is fully molded and UL/cUL listed with 14AWG, 16AWG and 18AWG PVC cables. The plugs are made to order with any required length and termination specification. Enter 312 Or email: sales@megaelectronics.com NEC ELECTRONICS CORP. MICRO PLASTICS The double-grip hose clamps feature a double-tooth interlocking jaw for strength and are molded in durable black Nylon 6/6 making them corrosion resistant with good chemical resistance. Sizes range from 1/4 in. through 2-3/4 in. An overlapping tapered ring is fastened around the hose or tubing and secured by compressing the double gripping interacting graves in a ratcheting fashion, creating a tight seal. Clamps can be removed by separating the clamping halves in perpendicular direction at the seal. The company offers three additional hose clamp product lines with installation tools in its plastic fasteners catalog. Enter 313 Or email: mpsales@microplastics.com Two 32-bit ARM processor cores that can be used with the company’s system-on-chip (SoC) design methodology has been designed to develop high-speed solutions for a variety of applications. Based on the ARM11 microarchitecture, the 700 MHz ARM11 MPCore is implemented using NEC Electronics’ 90 nm process technology and delivers ultra-high performance through multiprocessing at a low frequency. Full compatibility with existing electronic design automation (EDA) tools and flows can simplify otherwise complex multiprocessor design development and reduce time to market and design costs. The company’s implementation of the ARM926EJ-S processor can achieve a speed of 400 MHz (worst-case process, temperature and voltage) and is available for implementation with NEC Electronics’ 130 nm ASIC technology. Enter 315 Or email: support@am.necel.com OMRON ELECTRONIC COMPONENTS The D3SH series of SMD switches measure 3.4 mm x 3.0 mm x 0.9 mm and weighs 0.02 g. The switch is used in presence/ absence applications to detect location with an on/off signal. It is available in SPST-NO or SPST-NC contact configuration with a rating of 1 mA @ 5 VDC. The switches are available in a right or left operating direction, with standard levers (1.6 mm travel) or long levers (2.1 mm travel), and can be shipped with or without a locating boss. The D3SH is a durable switch exhibiting high shock and vibration resistance while operating in a temperature range of –25 DegC to 85 DegC in 60 percent humidity without icing or condensation. Enter 317 Or email: components@omron.com MICROCHIP TECHNOLOGY The dsPIC33FJ12MC family of Digital Signal Controllers (DSC) are 40 MIPS DSCs and provide a platform for advanced motor control algorithms such as Field-Oriented www.applianceDESIGN.com PANASONIC NEWAGE INDUSTRIES The Nylotube is stocked in six colors of semi-rigid and flexible grades, in inch and The BR 1/2AA-sized poly carbon monofluoride lithium battery operates in temperatures from –40 DegC to 100 DegC. The batteries have a capacity of 1,000 mAH, self-discharge of 0.5 percent per year at 20 DegC/60 applianceDESIGN December 2007 15 http://www.appliancedesign.com
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.