Engineered Systems - March 2009 - (Page 24)

BuildingAutomation BY PAUL EHRLICH, P.E., AND IRA GOLDSCHMIDT, P.E. BAS AND ADVANCED Improve your oversight and lighten your load. At this year’s AHR show in Chicago, we had the opportunity to conduct a full-day seminar on Advanced Integrated Lighting Control. While this is the fourth year that we have held an educational seminar at this event, it is the first time that we have focused exclusively on lighting control. So why would we want to talk about lighting control at an HVAC event? The answer was provided many times over by the industry leaders who presented. Here are some interesting facts: • Buildings are the largest single consumers of energy in North America, accounting for almost 40% of the total energy usage, and this is fairly evenly split between residential and commercial buildings. • Within buildings, HVAC use accounts for approximately 40% of the energy, while lighting is a close second, using 28%. • Lighting contributes to the cooling load of the building, so lowering lighting energy use results in a reduction of cooling energy use. • New codes and standards now have requirements for some form of lighting control. • Like HVAC, lighting has a significant impact on occupant comfort and productivity. The connection to both energy usage and comfort would appear to make lighting control a natural extension of BAS. However, it isn’t that easy. Lighting control is complicated since it is multidisciplinary. Lighting design may be done by an interior designer or specialized lighting designer, while power, circuiting, and switching typically falls to the electrical engineer with installation and checkout being done by the electrical contractor. Lighting control tends to follow these same paths, with the design and installation falling into the electrical scope of work. Ideally, the lighting control system would still be able to be designed and delivered as part of the electrical system, but a part that can be readily integrated to the BAS. Systems are now available that offer the ability to integrate using a variety of open protocols, including XML, BACnet®, Modbus, and LonTalk®. Designing a system to be integrated requires careful coordination between the BAS / integration design and the lighting control design. This coordination extends through installation, commissioning, and operations. Some of the common functions of an integrated lighting control system include: • Coordinated scheduling of lights and HVAC loads. While this seems simplistic, it has a giant potential for energy savings. • Control and monitoring of advanced lighting control functions such as daylight harvesting. The ability to take advantage of natural light from windows and skylights has a tremendous potential to both save energy and improve occupant comfort. Monitoring this through the BAS allows for improved tuning to get the most out of this often underutilized application. • Lighting control provides for effective and inexpensive occupancy sensing. Information on occupancy from the lighting system can be 24 En g i neer ed Sy stem s March 2009 Integrated Lighting Control The ability The ability to take advantage of take advantage natu al light from windo s and atura g o dows d skylights has a tremendous k li hts has ight tremend do s potential potential to both save energy and both save energy and improve occupant comf improve occupant comfort. fort. Monitori Monitoring this through the BAS nitoring thi through the BAS his g allows for improved tuning to get allows for improved tuning to get the most out of this often underutilized application. readily used for scheduling and control in the BAS. • For projects that are enrolled in a demand response program, the ability to shed lighting load provides an effective solution with little occupant impact. • New technologies with communicating ballasts offer the potential to gain valuable maintenance information including notification to replace bulbs. What we learned at this session is that lighting control is an exciting and rapidly evolving area. New technologies — including the use of wireless communications, networking, and open standards — are making the deployment of advanced lighting control practical in both new and existing building projects. It is worth taking a closer look at this area for your next project. ES Paul and Ira first worked together on a series of ASHRAE projects including BACnet committee and “Guideline 13 – Specifying DDC Controls.” The formation of Building Intelligence Group provided them the ability to work together professionally providing assistance to owners with the planning, design and development of Intelligent Building Systems. Building Intelligence Group provides services for clients worldwide including leading Universities, Corporations, and Developers. More information can be found at www.buildingintelligencegroup.com. We also invite you to contact us directly at paul@buildingintelligencegroup.com or ira@buildingintelligencegroup.com. http://www.buildingintelligencegroup.com http://www.buildingintelligencegroup.com

Table of Contents Feed for the Digital Edition of Engineered Systems - March 2009

Engineered Systems - March 2009 Contents Editor’s Note Back2Basics Case In Point Commissioning Building Automation HVACR Designer Tips Application Checklist Teaching An Old School New Tricks Basics For Absorption Chillers A New Haven For Sustainable Schools Glossary Classifieds Advertiser Index Tomorrow’s Environment

Engineered Systems - March 2009

For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.