Engineered Systems - March 2009 - (Page 26)

HVACRDesignerTips BY AMANDA MCKEW EDUCATIONAL FACILITY Commissioning and Project Closeout Checklist Equipment type: Dust collector and makeup air unit Equipment designation: DCE-1, VAVRH-1 Barcode designation: 11111 Area saved: Wood shop Equipment location: Outdoors system simulation is programmed and is trending. • Confirm LEED measuring and verification plan is programmed and trending. • Confirm 10-month warranty meeting to revisit site and discuss lessons learned, etc. BASIS OF DESIGN • Review and confirm design intent has been met. • Review and confirm control setpoints are within range of design criteria. • Review BAS computer trending to date. DOCUMENTATION TO BUILDING MANAGER • Transfer final commissioning report including: • Basis of design/design intent document • Commissioning plan/specification (for future building program use) • Prefunctional performance test checklists • Observation checklists • Field reports • Continuous commissioning BAS computer process is in place (if applicable) • Scrubbed FPT narratives for future use • Meeting minutes • Project photograph log and associated photographs • Lessons-learned meeting minutes • Transfer CAD-layered record drawings. • Transfer CAD-layered facility management drawings. • Transfer barcoded equipment, panel, and valve database. • Confirm equipment, panels, and valves are bar-coded. • Post system flow diagram and TAB flow diagram. • Transfer barcode scanner. • Transfer Commissioning 1-2-3 electronic files. • Transfer CMMS software with/or equipment database. • Transfer PM workorders. • Transfer service contract. • Transfer recommissioning manual. • Transfer ownership of laptop or tablet computer with Internet access and BAS computer for off-site monitoring. • Transfer recommended operating budget. ES SPECIFICATION REVIEW • Confirm Division 1 mechanical and electrical requirements (O&M manuals, record drawings, etc., have been submitted). • Confirm Division 15 mechanical requirements have been met. • Confirm Division 16 electrical requirements have been met. • Confirm Division 17 building automation requirements have been met. DRAWING REVIEW • Confirm equipment complies with shop drawing submittal. • Confirm equipment and distribution complies with standard details. • Review trade contractor’s punchlist. • Review contractor startup sheets. • Review building automation points list checkout. • Complete site inspection punchlist. • Review water balancing report data-to-actual performance (pressure gauge readings, flow meter readings, etc.). • Review air balancing and temperature operating data (cfm/fan, discharge temperature/fan). BUILDING SYSTEM DEMONSTRATION • Commissioning engineer facilitates functional performance tests (FPTs). • Spot-check system training during the FPTs. • Spot-check O&M manuals during the FPTs. • Confirm PM workorders are complete and ready to begin at time of certificate of occupancy. • Confirm BAS computer predictive maintenance monitoring and workorder initiation is complete and ready to begin at time of certificate of occupancy. • Maintain corrective action log and necessary retesting. • Set and observe deferred seasonal FPT has been completed. • Complete final commissioning report. ❍ Central Equipment ❍ Terminal Equipment & Space ✔ ❍ Project Closeout If you have any comments, suggestions, or questions regarding this designer checklist, contact Amanda McKew at amckew@rdkengineers.com. LEED® CERTIFICATION COMPLIANCE • Complete recommissioning manual. • Confirm system training has been completed and facility staff signoff on training class attendance. • Confirm LEED® energy optimization software and associated 26 En g i neer ed Sy stem s March 2009

Table of Contents Feed for the Digital Edition of Engineered Systems - March 2009

Engineered Systems - March 2009 Contents Editor’s Note Back2Basics Case In Point Commissioning Building Automation HVACR Designer Tips Application Checklist Teaching An Old School New Tricks Basics For Absorption Chillers A New Haven For Sustainable Schools Glossary Classifieds Advertiser Index Tomorrow’s Environment

Engineered Systems - March 2009

For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.