Quality Magazine - March 2009 - (Page 61) needed. It also is adaptable to a wide variation of inspections, and the lightweight durability makes it an invaluable part of everyday operations, both within the facility and offsite as needed. CAD-TO-PART INSPECTION CAD software helps Cole compare complex geometry, surface tolerances and positions to the nominal data. These measurements are shown in real time as a 3-D computer model, and any deviations can be immediately corrected. Reports are easily created that detail the CAD-to-part inspection results, certifying the in-process or fi nished product. Prototype parts are typically produced in small quantities, often in a trial and error process. The arm easily measures these parts and compares them to the original fi les in order to ensure they are produced correctly. The timesavings made by avoiding the lengthy programming procedure with Tool Certification according to ISO 5393 SCHATZ®-TEST Automatic torque-tool certification system. Increase Quality Reduce testing costs • Torque-tool certification on-site • Complete tool database • Automatic test planning … or ask for our service… We complete torque tool certification for you – on-site! • Test planning • Certification by trained personnel • Due date determination • Complete documentation • Automatic reminders • Equipment calibrated traceable to national standards Quality Quick Clicks 433 at qualitymag.com www.qualitymag.com x RETURN ON INVESTMENT The Platinum FaroArm’s touch-probe is guided along the surface of the object to be measured. A laptop computer simultaneously illustrates the 3-D measurements onscreen and automatically records all data. Source: Faro Technologies Inc. arm provides faster inspections and the capability to measure more complex geometry; it also aids in comparing customer CAD data to fi nish prototype parts. a traditional inspection tool and by working and re-working a part multiple times is a huge advantage for Cole. Quickly accepted by Cole’s engineers and operators, the arm was clearly a more efficient way to perform needed tasks. Additional benefits were its ability to create one-off inspections for setup and the output of inspection documentation. The For Cole, the return value of the arm was more than simple time and money savings, or even reduced scrap. The greatest value for their fast-paced job shop came in the flexibility and adaptability of the device. “After Faro’s great support group helped us with initial setup, we had a seamless integration,” says Berst. “Tube inspection jobs that used to take four hours can now be completed in 45 minutes or less. In the two and a half months since acquiring our FaroArm, we’ve saved 100 hours of work time.” Faro Technologies Inc. (407) 333-9911 www.faro.com Reply 12 EXTREMELY PORTABLE, POWERFUL, AND USEFUL The World’s Finest Portable Digital Microscope has just gotten better. Now with GridEditor ™ the DG-3x , provides a choice of 6 different scales for real-time measurements. xtremely portable xtremely useful xtremely powerful with lenses ranging from 0x-1000x Now with Grids for real-time measurements. Call today: (248) 369-8661 SCHATZ USA Inc. Holly, MI 48442 sales@schatz-usa.com www.schatz-usa.com For more information email sales@scalarscopes.com or call 1-877-Scalar-1 Quality Quick Clicks 434 at qualitymag.com March 2009 | QUALITY 61 http://www.faro.com http://www.schatz-usa.com http://www.schatz-usa.com http://www.qualitymag.com http://www.qualitymag.com http://www.qualitymag.com
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.