Dr. Dobb's Journal - November 2008 - (Page 28)

Core Technology by Craig A. Lindley Building Your Own Web Server Webster2 is a low-power, personal web server To lower my energy consumption and carbon footprint, I decided about a year ago to build a Craig is a degreed hardware engineer who, until recently, had been writing large-scale Java applications. He can be contacted at calhjh@gmail.com. low-power web server for use in hosting my personal website. Previously I had used an old desktop PC as a host, but knew it consumed way more energy (100× even without a monitor) than what I had in mind. My quest began with the design of a web server based on a 20-MHz 8-bit PIC microcontroller (this design was published in the July 2008 issue of Nuts and Volts (www.nutsvolts.com). The design consumed little power, but wasn’t fast enough to be truly practical. This first-generation “Webster” was like the little engine that could. It tried really hard to push out media-rich pages, but it took a long, long time to do so. The second-generation “Webster” used a faster 16bit PIC processor with built-in Ethernet hardware also running the Microchip TCPIP stack. But even with an increased clock rate and word length, this design also was quickly dismissed as inadequate. For generation three, I used a NetBurner (NB) MOD5270 module (www.netburner.com) coupled with custom electronics, which included a power supply and an SD card interface. This design had all of the features and performance I needed and was used successfully for my website for eight months. Unfortunately, this web server was terminally damaged when I tried to change out a part that had failed. Knowing I had to build yet another web server to replace the broken one and being happy with the NB hardware, I created the fourth generation Webster, which I call “Webster2” because it is the second of the designs published. In this iteration, I did away with custom hardware and based the design on the NB MOD5270LC development kit. With the stock NB hardware, building the web server was a breeze. (For the record, I have no affiliation with NetBurner Inc. other than being a very satisfied customer.) Webster2’s features include: • Low-power operation. Only 250 mA is required at 3.3 volts, or about 0.8 watts. • Small size. The packaged web server is about the size of a hardbound book. • 100 baseT Ethernet connectivity. • Support for static and dynamic IP address assignment. • Based upon a 32-bit ColdFire processor running at 147 MHz. • Support for basic authentication for website access control. • A built-in SD memory card interface (up to 64 GB max) for web page file storage. • A built-in FTP server allowing for in place update of website content. At present, the Webster2 web server software is configured to serve static HTML pages only and cannot be used for applications that require write access to the underlying filesystem. This was a conscious design decision that could easily be changed if your application requires it. Webster2 and Me Besides the energy conservation issue, Webster can be put on the Internet without concern for viruses and spyware. Webster’s software is written entirely in C++ with no underlying operating system with 28 Dr. Dobb’s Journal l www.ddj.com l November 2008 http://www.nutsvolts.com http://www.netburner.com http://www.ddj.com

Table of Contents Feed for the Digital Edition of Dr. Dobb's Journal - November 2008

Dr. Dobb's Journal - November 2008 Contents Friday Night Fish Fry Alia Vox Developer Diaries Developer's Notebook Saving Open Source Conversations iPhone Building Your Own Web Server Green Telnet What's New In Boost Threads? Testing Service Oriented Architectures Test Case Generation, UML, and Eclipse Unit Testing Web Services C3 Programming The Agile Edge Swaine's Flames Effective Concurrency

Dr. Dobb's Journal - November 2008

For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.