Microwave Engineering Europe - September 2008 - (Page 38)

38 PRODUCTS Pre-qualified all-in-one Bluetooth module saves development time and cost Murata’s latest all-in-one Bluetooth module enables designers to easily integrate Bluetooth functionality into their applications without speciﬁc RF knowledge or expertise, saving development time, resource and cost. The LBMA46LCS integrates all the components necessary for Bluetooth operation including Bluetooth chipset, antenna ﬁlter, EEPROM and oscillator. Further, the all-in-one module is pre-qualiﬁed for Bluetooth, saving time and cost for Bluetooth qualiﬁcation. This allows customers to reduce Bluetooth-related test and measurement at production sites. The module is ideal for mobile phone, headset, PDA, portable media player and portable device applications. The LBMA46LCS uses the company’s proprietary LTCC (low temperature coﬁred ceramic) technology and is one of the smallest Bluetooth modules on the market — measuring just 6.65 by 6.15 mm with a maximum height of 1.5 mm. It supports Bluetooth version 2.0 + EDR and features class 2 output power (0 dBm typical). Rx sensitivity is typically -82 dBm and the device supports several interfaces including USB, UART, BCSP and H4DS. It is RoHS compliant. www.mwee.com/210300455 High-power, solid-state, UHF power amplifier for airborne and fixed location operations A dual input, single output design provides 100-W per channel output across 290 to 320 MHz. The ampliﬁer operates at full rated capability from a 22 to 32 VDC power supply. The US1498 features a thermally-efﬁcient, ﬁnned, lightweight aluminum housing for customer-supplied forced air cooling, and incorporates four-bit digital attenuators on each channel that enable independent power control of each channel. Other features include a minimum power of 100 W per channel or 250 W for a single channel, enhanced redundancy capability, VSWR and high temperature alarm outputs, AN/ PRC 117(F) compatibility, and integrated output isolator for a tight impedance match and protection against poor VSWR. www.mwee.com/210300416 The US1498 high power, solid state, ultra-high frequency (UHF) power ampliﬁer from CAP Wireless is designed especially for airborne and ﬁxed location operations — delivering outstanding efﬁciency, linearity, and power ampliﬁcation. Power efﬁciency is over 28 percent (two channels, 100 W/channel), while linearity is under -30 dBc. The ampliﬁer employs laterally diffused metal oxide semiconductor (LDMOS) device technology to ensure reliability and robustness in high temperature and poor load VSWR environments. Microwave Engineering Europe ● September 2008 ● www.mwee.com 038_MWEE.indd Sec1:38 4/09/08 15:20:11 http://www.mwee.com/210300455 http://www.telogyllc.com http://www.mwee.com/210300416 http://www.mwee.com

Table of Contents Feed for the Digital Edition of Microwave Engineering Europe - September 2008

Microwave Engineering Europe - September 2008 News Contents Comment Cover Feature: Uncovering Test and Measurement’s Role in Advancing LTE and Mobile WiMAX WiMax: WiMax and LTE Need to Address Issues of Backhaul, Cost and Efficiency for Successful Deployment WiMax: Manufacturing Communications Technology Products in India Test and Measurement Mobile Platforms Evolve to Meet Future Demands Products Calendar

Microwave Engineering Europe - September 2008

For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.