Conformity Magazine - March 2008 - (Page 58)

NewsBreaks • IEC 60317-55 Ed. 1.0 (2007-11) Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, Class 180 • IEC 60320-1 Ed. 2.1 (2007-11) Appliance couplers for household and similar general purposes - Part 1: General requirements • IEC 60730-2-14 Amd.2 Ed. 1.0 (2007-11) Amendment 2 - Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators • IEC 60884-2-4 Ed. 3.0 (2007-11) Plugs and socket-outlets for household and similar purposes Part 2-4: Particular requirements for plugs and socket-outlets for SELV • IEC 61058-1 Amd.2 Ed. 3.0 (2007-11) Amendment 2 - Switches for appliances - Part 1: General requirements • IEC 61800-7-1 Ed. 1.0 (2007-11) Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition • IEC 61800-7-201 Ed. 1.0 (2007-11) Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification • IEC 61800-7-202 Ed. 1.0 (2007-11) Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification • IEC 61800-7-203 Ed. 1.0 (2007-11) Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification • IEC 61800-7-204 Ed. 1.0 (2007-11) Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification • IEC 61800-7-301 Ed. 1.0 (2007-11) Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies • IEC 61800-7-302 Ed. 1.0 (2007-11) Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies • IEC 61800-7-303 Ed. 1.0 (2007-11) Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies • IEC 61800-7-304 Ed. 1.0 (2007-11) Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies • IEC 61915-1 Ed. 1.0 (2007-11) Lowvoltage switchgear and controlgear Device profiles for networked industrial devices - Part 1: General rules for the development of device profiles Electromagnetic Compatibility • IEC 62153-4-1 Ed. 1.0 (2007-11) Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements Electronics • IEC 62341-1-2 Ed. 1.0 (2007-11) Organic light emitting diode displays - Part 1-2: Terminology and letter symbols Fiber Optic Communications • IEC 60874-19-1 Ed. 3.0 (2007-11) Fibre optic interconnecting devices and passive components Connectors for optical fibres and cables - Part 19-1: Fibre optic patch cord connector type SC-PC (floating duplex) standard terminated on multimode fibre type A1a, A1b Detail specification • IEC 60874-19-3 Ed. 2.0 (2007-11) Fibre optic interconnecting devices and passive components Connectors for optical fibres and cables - Part 19-3: Fibre optic adaptor (duplex) type SC for multimode fibre connectors - Detail specification • IEC 61300-3-42 Ed. 1.0 (2007-11) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-42: Examinations and measurements - Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves Household • IEC 60730-2-17 Ed. 1.2 (2007-11) Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements www.ieee-pses.org For New England meeting and event information, visit the NPSS website. www.nepss.org 58 Conformity marCh 2008 http://www.ieee-pses.org http://www.ieee-pses.org http://www.nepss.org

Table of Contents Feed for the Digital Edition of Conformity Magazine - March 2008

Conformity Magazine - March 2008 NewsBreaks Editor's Note Adelstein Renominated to the FCC Industry Canada Publishes FAQs On RF Fields FDA Gives Its Scientific Capabilities Poor Marks FDA Offers Guidance On its Product Review Process FDA Publishes Updates to List of Recognized Standards FDA Warns of Patient Risk From Electric Dental Handpieces Complying with the EMC Directive, Second Edition ESD Open Forum Emerging Issues in Standards - Korean "RoHS": Not Like RoHS at All The iNARTE Informer Challenges in Testing - Field-Induced Charged Device Model: What Really Happens Design Fundamentals - EMI Shielding Technologies for Consumer Electronics Equipment Focus On...Compliance Software Buyer's Guide Additional Standards Published for the EU's ATEX Directive Additional Standards for the EU's Medical Devices Directive Also Published China to Require Bar Codes to Enhance Product Safety CPSC Releases 2007 Self-Assessment CPSC Actions in News IEC Standards Update UL Standards Update Product Reviews Telcordia Standards Update From Our "You Can't Make This Stuff Up" Department Looking Back: Items from Past Issues of Conformity Advertisers

Conformity Magazine - March 2008

For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.