Nailpro - June 2017 - 116
For a brand new way to create enhancements, try Gelish
PolyGel. Formulated to be strong and lightweight, the product
is odorless, monomer- and 7-free and produces no airborne
dust. Available in six shades.
Prep the nail and apply a tip.
Apply one coat of pH Bond* to the
natural nail only. Then, apply one coat
of ProBond* acid free nail primer to the
natural nail only.
Squeeze the tube of Natural Clear
PolyGel to release the product
and slice off the desired amount with
the ﬂat edge of the PolyTool.
Use the PolyTool to roll the product onto the nail.
Apply two coats of gel polish,
curing after each.
Cleanse the nail. Apply one coat
of gel base coat and cure for 5
seconds. Then, wipe a clean gel brush
over the surface of the nail to remove
any excess base coat; this will cause
the surface to become slightly tacky
and allow the polish to adhere better.
To ﬁnish, apply gel top coat and
For a step-by-step video, go to nailpro.com/video/gelish-polygel/
*Not included in collection.
PHOTOS: (NAILS) JASON BENNETT; (PRODUCT) COURTESY OF GELISH
To smooth the surface, lightly ﬁle
the nail with a 180-grit ﬁle. Finish
shaping with a 180-grit buffer.
Switch to the brush side of the
PolyTool. Dip the brush into the
Slip Solution, then shape the nail by
lightly patting the product. Keeping the
brush close to the surface, continue
until the nail and tip are covered.