EZ Rod & Wire - (Page 70) Wall Mount Gripper Assemblies Web Site Link Parts include everything shown unless otherwise noted. Wire and Rod sold separately. EZ Rod/Wire How To: Wall Mount Rod Gripper Assemblies EZ Rod/Wire Wire, Rod, Wall Mounts & Hinges Wire & Rod Grippers EZ-Mounted Rod Gripper EZ-Mounted Wire Gripper Part Holds Part Holds Turnbuckles EZ-A29 1/4" Rod EZ-A31 3/8" Rod Mounting Surface EZ-A25 EZ-A27 3/64" Wire 1/8" Wire Mounting Surface Hinge & Turnbuckle Assy’s 1/2" Cut the EZ-Rod to the desired length, about 1/16" short of touching the EZ-AHTM fitting, to allow for tensioning the final assembly. Wall Mount Gripper Assy’s Transition Connectors & Couplers Transition Assemblies 1/2" Shelf & Saddle Grippers Length of Wire is the Mounting Surface Distance distance less 1-5/16" Length of Rod is the Mounting Surface Distance distance less 1-7/8" For a 3/8" rod Heavy Connection, fully seat the rod and collar in the HD-AHRDJ, with a #41 bit, drill thru and insert the roll pin. Hub, Link & Connectors Shelf Grip Assemblies 13/16" Saddle Gripper & Connector Assy’s Spacer, Press-Fit Connector & Link 1-3/8" Mounting Surface Mounting Surface EZ-Mounted Wire Turnbuckle Part Holds *EZ-A30 for 1/4" Rod has a shorter Turnbuckle Housing Part EZ-Mounted Rod Turnbuckle Holds 5/8" Rod Travelers EZ-A26 3/64" Wire EZ-A28 1/8" Wire Panel Grippers EZ-A30 1/4" Rod* EZ-A32 3/8" Rod EZ-AH32 3/8" Rod Heavy Slide the Turnbuckle shell into position, screw it onto the EZ-HTM and tighten the set screw to secure the assembly. Notice that the EZ-AHR375 is installed at the top and the EZ-A31 (or similar) at the bottom when maximum strength is desired. A graphic panel is mounted between a counter top and the ceiling using EZ-Rod Grippers and Turnbuckles. Wall Plates & Pulleys Panel Grippers for 1/8" Note: For EZ-AH24 heavy connection, entire assembly is installed with the Rod Gripper at the bottom and the Turnbuckle on top. See illustrations on the bottom right of Page 67, the Turnbuckle used in the Heavy assembly is the AHR375. EZ EZ 70 71 http://www.standoffsystems.com
Table of Contents Feed for the Digital Edition of EZ Rod & Wire EZ Rod/Wire Wall Mounts & Hinges Wire & Rod Grippers Turnbuckles Hinge & Turnbuckle Assemblies Wall Mount Gripper Assemblies Transition Connectors & Coupler Transition Assemblies Shelf & Saddle Grippers Hub, Link & Connectors Shelf Grip Assemblies Saddle Gripper & Connector Assy’s Spacer, Press-Fit Connector & Link 5/8” Rod Travelers Panel Grippers Wall Plates & Pulleys Panel Grippers for 1/8” Wire INDEX OF PART #’S EZ Rod & Wire EZ Rod & Wire - EZ Rod/Wire (Page Cover1) EZ Rod & Wire - EZ Rod/Wire (Page Cover2) EZ Rod & Wire - Wall Mounts & Hinges (Page 62) EZ Rod & Wire - Wire & Rod Grippers (Page 64) EZ Rod & Wire - Turnbuckles (Page 66) EZ Rod & Wire - Hinge & Turnbuckle Assemblies (Page 68) EZ Rod & Wire - Wall Mount Gripper Assemblies (Page 70) EZ Rod & Wire - Transition Connectors & Coupler (Page 72) EZ Rod & Wire - Transition Assemblies (Page 74) EZ Rod & Wire - Shelf & Saddle Grippers (Page 76) EZ Rod & Wire - Hub, Link & Connectors (Page 78) EZ Rod & Wire - Shelf Grip Assemblies (Page 80) EZ Rod & Wire - Saddle Gripper & Connector Assy’s (Page 82) EZ Rod & Wire - Spacer, Press-Fit Connector & Link (Page 84) EZ Rod & Wire - 5/8” Rod Travelers (Page 86) EZ Rod & Wire - Panel Grippers (Page 88) EZ Rod & Wire - Wall Plates & Pulleys (Page 90) EZ Rod & Wire - Panel Grippers for 1/8” Wire (Page 92) EZ Rod & Wire - INDEX OF PART #’S (Page Cover4)
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.