StandOffs - (Page 18) Grippers StandOffs How To: Grippers Web Site Link (Parts include everything shown unless otherwise noted) All StandOff Grippers are available in CLEAR and BLACK anodized finish. Black anodize available at additional cost. Cup Point set screw and 5/16-18 fastener included. Nylon Tip set screw optional for glass, and other materials. 1/4" StandOffs SO-AGR250 9/32" 1-3/16" 2-1/8" 1/4" Gripper 1-1/4" (Specify material & application) Includes 5/16-18 x 3/4" Stud Part SO-AGR250 Holds 1/4" Round Caps Use for suspending… Geometric Caps SO-AGR375 7/16" 1/4" 3/8" Gripper 1-1/4" (Specify material & application) Includes 5/16-18 x 1/2" Low Head Part Holds 3/8" SO-AGR375 Attach the desired part using a low head socket cap screw or threaded stud. Low Proile Caps 1-3/16" 2-1/16" Security Caps SO-AGR500 Barrels 9/16" 1/4" 1/2" Gripper (Specify material & application) Includes 5/16-18 x 1/2" Low Head Part SO-AGR500 1-3/16" 2-3/8" Holds 1/2" 1-1/4" 5/16-18 Cup Point set screw (typical) Hubs Place a panel in the mouth of the Gripper. Hold the panel in place while tightening the set screw. Links & Travelers SO-AGR750 1/2" 3/4" Gripper Grippers 25/32" 1-3/4" (Specify material & application) Includes 5/16-18 x 1/2" Low Head Part SO-AGR750 Holds 3/4" Edge Grips 1-15/16" 3-11/64" Gripper Assemblies Fixed Hinges (Specify material & application) Includes Low Head & (3) Mounting Screws Wall plate is 2-1/4" diameter x 1/4" thick SO-AGR250 Thru 750/WMBT Or, mount the Gripper to a surface then slide panel into mouth of Gripper and tighten set screw until snug. SO 18 vertical or… Part SO-AGR250/WMBL SO-AGR375/WMBT SO-AGR500/WMBT SO-AGR750/WMBT Holds 1/4" 3/8" 1/2" 3/4" horizontal applications. Note: Specify the surface that the Gripper will be mounted to, and what panel material will be used. SO 19 http://www.standoffsystems.com
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.