Wire Suspension - (Page 33) Shelf Hub & Turnbuckle Assemblies Web Site Link Parts include everything shown unless otherwise noted. Wire Suspension parts are for use with 3/64" WS-Wire, Wire sold separately Wire Suspension How To: Shelf Hub & Turnbuckle Wire & Wire Connectors 5/8" max Shelf Clips & Connectors Shelf Hub & Turnbuckle Assy’s Spreader Bars & Mounting Plates WS-A25 Shelf Hub Assembly Vinyl Washer 7/16" OD Plastic Tubing Vinyl Washer Wire Suspension Specify panel thickness when ordering Part WS-A25 Panel thickness Max. 5/8" WS-ATWC/TH 10-24 Flat Point set screws Wire thru-hole 5/16-18 Right Hand thread 5/8" 5/8" A WS-A25 assembled on a shelf prior to adjusting and tightening. It has a capacity of 0 to 5/8" thickness Pulley Holde Holders 1" Threaded Wire Connector WS-ATWC/TH wire hole passes completely through Part WS-ATWC/TH Right Hand Threads WS-ATWC/LH Left Hand Threads Pulley Wheel & Pulley Assy’s WS-ATWC/LH 10-24 Flat Point set screws Wire Shelf Clips, As Hub & Assy’s Econo Hinges 5/16-18 Left Hand thread Turnbuckles are used to set the tension required on Wire Suspension systems. Econo Grippers Gripper WS-ASH A WS-A16 ‘Flying Turnbuckle shown loosely assembled, adjusts wire tension by turning the WS-ATB in the center to lenghten or shorten the Turnbuckle. Econo Saddle & Panel Grippers 1/2" 1-1/4" Part 5/8" 5/16-18 thread WS-ASH Shelf Hub Used as wall plates and shelf holders Wire Turnbuckle As Assemblies Shelf Clip, Hinge Assembly WS-ATB 5/16-18 Right Hand threads 5/16-18 Left Hand threads 5/8" 1-1/2" Part Turnbuckle Right hand threads in one end, left hand threads in the other Assemblies for Extrusions WS-ATB Assemblies for Extrusions Truss Clamps WS-A16 Min length 3-3/8" Max length 4-3/8" Flying Turnbuckle Assembly Used to tension wire Part WS-A16 Total Travel 1” extended to closed WS 32 Once the proper tension is achieved with the WS-A16 turnbuckle, both jamb nuts are tightened to lock the turnbuckle WS 33 http://www.standoffsystems.com
Table of Contents Feed for the Digital Edition of Wire Suspension Wire Suspension Contents Wire & Wire Connectors Shelf Clips & Connectors Shelf Hub & Barnbuckle Assemblies Index by Part Spreader Bars & Mounting Plates Pulley Holders Pulley Wheel & Pulley Assembles Wire Shelf Clips, Hub & Assemblies Econo Hinges Econo Grippers Econo Saddle & Panel Grippers Wire Turnbuckle Assemblies Shelf Clip, Hinge Assemblies Assemblies for Extrusions Assemblies for Extrusions Brass Clamps Wire Suspension Wire Suspension - Contents (Page 27) Wire Suspension - Wire & Wire Connectors (Page 29) Wire Suspension - Shelf Clips & Connectors (Page 31) Wire Suspension - Index by Part (Page 33) Wire Suspension - Spreader Bars & Mounting Plates (Page 35) Wire Suspension - Pulley Holders (Page 37) Wire Suspension - Pulley Wheel & Pulley Assembles (Page 39) Wire Suspension - Wire Shelf Clips, Hub & Assemblies (Page 41) Wire Suspension - Econo Hinges (Page 43) Wire Suspension - Econo Grippers (Page 45) Wire Suspension - Econo Saddle & Panel Grippers (Page 47) Wire Suspension - Wire Turnbuckle Assemblies (Page 49) Wire Suspension - Shelf Clip, Hinge Assemblies (Page 51) Wire Suspension - Assemblies for Extrusions (Page 53) Wire Suspension - Assemblies for Extrusions (Page 55) Wire Suspension - Brass Clamps (Page 57)
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.