Thermoforming Isofolan Foil Scheu Insulation foil used for pressure moulding technique. Optimal insulation for plaster models against cold cure acrylics. Also can be used as space maintainer foil for splints. 0.10 x 125mm Pack of 100 Softcast S-3207 Scheu Soft elastic material. Does not bond to acrylic; Combustible. Application: for delicate copings. Round, 0.6 x 125mm Pack of 10 Space Maintainer Foil S-3191 Scheu Spacer for copings, 0.10 x 125mm Pack of 100 S-3202 Mesh layer, nylon mesh for stabilisation during fabrication of pressure moulded mouth guards Pack of 10 S-3224 Foam Discs Scheu Foam Discs can be used as space holder and insulation for pressure moulded impression trays, providing retention to impression material. www.henryschein.com.au ΓΈ 103mm Pack of 10 860 S-3444 Refer to Laboratory Equipment Page 632 for Thermoforming Machineshttp://www.henryschein.com.au//Product/S-3207/Isofolan-125-x-0~1-mm-Round-Pack-of-100 http://www.henryschein.com.au//Product/S-3202/Spacer-Foil-125-x-0~1-mm-Round-Round-Pack-of-100 http://www.henryschein.com.au//Product/S-3444/Foam-Discs-Special-Tray-Sponge-Round-Pack-of-10 http://www.henryschein.com.au