Krylon Canadian Product Guide 2008 - English - (Page 15) PRIMERS Water-Reducible Alkyd Primer Water-Reducible Alkyd Primer is for general industrial use on steel either as a single shopcoat or as the primer for Krylon Industrial Water Reducible Alkyd Enamel. • COV: 336 g/L (2.8 lb/gal) • Fast drying • Excellent corrosion resistance • Early moisture resistance Recommended Uses: Steel, iron and aluminum COLOURS* Red Grey 18.9 L pails K00022764-20 K00022793-20 Hi-Solids Universal Primer Hi-Solids Universal Primer is a rust inhibitive, modified alkyd metal primer offering excellent performance properties. It is also suitable as a barrier coat over conventional coatings, which would normally be attacked by the strong solvents found in high performance coatings. • COV: 304 g/L (2.53 lb/gal) • Fast drying • Excellent corrosion resistance • High solids for a quick film build • 30 minutes dry to touch • May be topcoated with a wide range of topcoats, including alkyds, acrylics, epoxies and polyurethanes Recommended Uses: Ideal for the construction, machinery and farm equipment markets in applications including structural steel, machinery and equipment, rail cars, piping, marine applications, tanks and vessels COLOURS* Grey Off White 3.78 L cans K00025002-16 K00025004-16 18.9 L pails K00025002-20 K00025004-20 Universal Primer Universal Primer is a one-package, epoxy ester primer offering excellent performance properties. Accepts a wide range of topcoats. • COV: 405 g/L (3.36 lb/gal) • Can be topcoated with two-component polyurethanes, epoxies, alkyd enamels and acrylic enamels • Fast drying • Excellent corrosion resistance • High solids for quick film build with minimum number of passes Recommended Uses: Construction machinery and farm equipment, steel, iron and primed aluminum COLOURS* Brown White 3.78 L cans K00023003-16 K00023004-16 18.9 L pails K00023003-20 K00023004-20 Industrial Epoxy Primer Industrial Epoxy Primer is a high solids, two-component epoxy polyamide primer. Especially suitable for use under Krylon Industrial High Gloss Polyurethane, when superior corrosion resistance is needed. • COV: 325 g/L (2.7 lb/gal) • Excellent corrosion and chemical resistance • No induction or “sweat-in” time • May be used in plural component equipment Recommended Uses: Steel, galvanizing and aluminum COLOURS* Grey (Part A) Catalyst (Part B) 946 mL cans K00023501-14 3.78 L cans 15.1 L pails K00023500-16 K00023500-19 K00023501-16 3 to 1 mix ratio – Paint to Hardener For details on Iron Guard® Primer see Page 17. * For Colour Selections, see Pages 38-40. For details on Rust Tough® Primer see Page 18. 15 CUSTOMER SERVICE Phone: 866-736-1486 Fax: 800-243-3075 www.KPG-Industrial.com http://www.kpg-industrial.com/products/waterreducible_alkyd_primer/ http://www.kpg-industrial.com/products/hisolids_universal_primer/ http://www.kpg-industrial.com/products/universal_primer/ http://www.kpg-industrial.com/products/industrial_epoxy_primer/ http://www.kpg-industrial.com/products/hisolids_universal_primer/ http://www.kpg-industrial.com/products/waterreducible_alkyd_primer/ http://www.kpg-industrial.com/products/universal_primer/ http://www.kpg-industrial.com/products/industrial_epoxy_primer/ http://www.KPG-Industrial.com
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.