Krylon Canadian Product Guide 2008 - English - (Page 16) PRIMERS Water-Reducible Wash Primer Water-Reducible Wash Primer is a water-based wash primer free of heavy metals and mineral acids. • COV: 143 g/L (1.19 lb/gal) • Accepts high performance “hot” solvent topcoats, such as epoxies and urethanes • Designed to be applied over aluminum and galvanizing or to be used as a tie-coat over zinc-rich primers Recommended Uses: Aluminum, zinc-rich primers, galvanizing, stainless steel COLOURS* Yellow-Green 3.78 L cans K00021000-16 18.9 L cans K00021000-20 Galvanized Metal Primer Galvanized Metal Primer is a solvent-based acrylic coating. • COV: 312 g/L (2.60 lb/gal) • May be used untopcoated or topcoated with select waterborne or solvent-based coatings • Intended for use in mild industrial and commercial environments • Acceptable for use in federally-inspected meat and poultry plants Recommended Uses: For use over prepared galvanized steel, primed ferrous metal, galvalume, and zinc-rich primers such as joists, metal deck ceilings, railings and conduits COLOURS* Off White 3.78 L cans K00024000-16 Water-Based Epoxy Primer Water-Based Epoxy Primer is a two-component, acrylic, catalyzed epoxy for high performance in industrial and commercial environments. • COV: 163 g/L (1.36 lb/gal) • Upgrade surfaces painted with conventional coatings to a high performance protection system without lifting and bleeding • Low odour Recommended Uses: For use over prepared substrates such as steel, aluminum and concrete in industrial, high maintenance commercial and institutional environments such as hospitals, schools, pharmaceutical houses, exterior storage tanks, institutional kitchens and manufacturing equipment COLOURS* Off White (Part A) Gloss Hardener (Part B) Semi-Gloss Hardener (Part B) 3 to 1 mix ratio–Paint to Hardener 3.78 L cans K02448430-16 K02448431-14 K02448431-16 K02448432-14 K02448432-16 946 mL cans Heavy Duty Block Filler Heavy Duty Block Filler is a pure acrylic, resin block filler. • COV: 15 g/L (0.13 lb/gal) • For lighter duty applications, use Krylon Interior/Exterior Latex Block Filler • For use on interior and exterior poured and precast concrete, concrete block and cinder block Recommended Uses: For use over prepared masonry surfaces in dairies, bottling plants, mining industry, tunnels, chemical plants, paper mills, equipment foundations, jails, petroleum refineries, power plants, water and sewage, schools, treatment facilities, hospitals and industrial concrete ceilings and walls COLOURS* White 18.9 L pails K00261646-20 * For Colour Selections, see Pages 38-40. Zinc-Rich Epoxy Primer Zinc-Rich Epoxy Primer is a three-component, polyamide epoxy, zinc-rich coating. It contains 90.3% by weight of zinc dust pigment in its dried film. • COV: <100 g/L (0.71 lb/gal) mixed, unreduced • Fast recoat time • HAPS free • Damaged film exhibits “self healing” properties Recommended Uses: For use over properly prepared blasted steel in fabrication shops, on bridges, highways, stadiums and sports complexes, piping, refineries, barges and ships. Not recommended for immersion service. Colours Grey Base (Part A) Hardener (Part B) Zinc Dust (Part C) 3.78 L cans K00027500-16 K00027501-16 K00027999-52 1 to 1 to 1 mix ratio – Paint to Hardener to Dust 16 http://www.kpg-industrial.com/products/galvanized_metal_primer/ http://www.kpg-industrial.com/products/waterreducible_wash_primer/ http://www.kpg-industrial.com/products/waterbased_epoxy_primer_k0244_series/ http://www.kpg-industrial.com/products/heavy_duty_block_filler/ http://www.kpg-industrial.com/products/zincrich_epoxy_primer/ http://www.kpg-industrial.com/products/heavy_duty_block_filler/ http://www.kpg-industrial.com/products/waterreducible_wash_primer/ http://www.kpg-industrial.com/products/waterbased_epoxy_primer_k0244_series/
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.