Krylon Canadian Product Guide 2008 - English - (Page 22) EPOXIES Water-Based Epoxy Water-Based Epoxy is a high performance, catalyzed epoxy coating. • COV: 180 g/L (1.5 lb/gal) • For interior and exterior use • Corrosion and chemical resistant • Upgrade surfaces painted with conventional coatings to a high performance protection system without lifting and bleeding • Flash rust resistant • Low odour • Acceptable for use in federally inspected meat and poultry plants Recommended Uses: For use over prepared substrates such as steel, aluminum and concrete in industrial environments, including tile-like wall coatings, interior institutional/commercial high maintenance areas, hospitals, schools, pharmaceutical houses, exterior storage tanks, institutional kitchens and manufacturing equipment COLOURS* 946 mL cans White BASES White Deep Clear Hardeners Gloss K02448431-14 Semi-Gloss K02448432-14 4 to 1 mix ratio–Paint to Hardener 3.78 L in a 3.78 L can K02440404-16 15 L in a 18.9 L pail Epoxies provide heavy-duty performance for challenging environments and tough industrial applications. They are known for their excellent chemical and abrasion resistance properties. These coatings are excellent for floors, walls and harsh processing environments. K02447252-16 K02447253-16 K02448431-16 K02448432-16 K02447250-19 K02447252-19 K02447253-19 * For Colour Selections, see Pages 38-40. Can be tinted using Color-On-Demand. See Page 41 for details. High Solids Industrial Epoxy High Solids Industrial Epoxy is a two-component polyamide epoxy coating. • COV: 374 g/L (3.12 lb/gal) • Chemical resistant • Abrasion resistant Recommended Uses: Heavy-duty interior structural coating, abrasion and chemical resistant floor coating, institutional/commercial high traffic, sanitary wall coating, chemical resistant equipment coating, chemical processing equipment and structures, schools, paper mills, clean rooms, refineries, lavatories, masonry construction, storage tanks, laboratories, power plants and offshore structures COLOURS* Safety Red Safety Black Safety Orange Safety Yellow BASES White Deep Clear Hardeners Epoxy 1 to 1 mix ratio– Paint to Hardener 3.78 L cans K03800101-16 K03800113-16 K03800499-16 K03802910-16 K03807250-16 K03807252-16 K03807253-16 K03809681-16 Fast Cure Epoxy Fast Cure Epoxy is a high solids, high build, fast drying, polyamide epoxy designed to protect steel and concrete in an industrial environment. • COV: <100 g/L (0.83 lb/gal) • Low odour • Chemical resistant • Abrasion resistant Recommended Uses: For use on parts with sharp edges, corners, and welds in fabrication shops, pulp and paper mills, power plants, offshore platforms, water treatment plants and refineries. May be used in a food processing plant. Not suitable for potable water. COLOUR*/BASE White (Part A) [May be tinted or used as white] Hardener (Part B) 3.78 L cans K03707250-16 K03704444-16 22 http://www.kpg-industrial.com/products/waterbased_epoxy_k0244_series/ http://www.kpg-industrial.com/products/high_solids_industrial_epoxy_k0380_series/ http://www.kpg-industrial.com/products/fast_cure_epoxy_k0370_series/ http://www.kpg-industrial.com/products/waterbased_epoxy_k0244_series/
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.