Krylon Canadian Product Guide 2008 - English - (Page 25) FLOOR COATINGS Water-Based Single Component Acrylic Floor Coating Water-Based Single Component Acrylic Floor coating is a general purpose, waterborne floor coating. • COV: 150 g/L (1.25 lb/gal) • For interior or exterior use • Low odour • Dries rapidly to a tough, alkali resistant finish • Will withstand hard wear, abrasion, grease, oils and cleaning equipment • Not recommended for areas subject to hot tire pickup Recommended Uses: For use over prepared concrete and wood floors, steps, stairwells, aisleways, or previously painted floor surfaces in sound condition. Great for laboratories, light assembly and production areas, hospitals, industrial and commercial office areas and helipads COLOURS* Grey Deck Grey Tile Red White BASES Clear 3.78 L cans K05000100-16 K05000140-16 K05000404-20 K05007253-16 18.9 L pails K05000100-20 K05000120-20 Coating the floor of a facility is a big job - and it’s a job you want to do right the first time. Acrylic floor coatings are for light-duty applications such as storage rooms and other light traffic areas. Epoxy coatings are an excellent choice for heavy-duty requirements such as high traffic and chemical processing areas. Dura-Top® Epoxy Floor Coating A silica (sand) aggregate may be broadcast with Dura-Top® to provide a non-slip texture using the following guidelines: • Very coarse texture: 35 mesh silica • Coarse texture: 50-60 mesh silica • Smooth texture: 70-80 mesh silica Dura-Top Epoxy Floor Coating is a self-leveling, 100% solids, two-component floor system • COV: 0 g/L (0.00 lb/gal) • Low odour • Provides a high gloss, seamless surface that is hard wearing and durable • Good chemical resistance under spill/splash conditions • Can be applied at thicknesses from 10.0 to 30.0 mils dft • A non-slip texture can be added Recommended Uses: Warehouses, workshops and light assembly areas 3 L in a COLOURS* 3.78 L can Haze Grey Deck Grey Tile Red Sandstone Hardener Part B K05409005-16 3.2 to .8 mix ratio–Paint to Hardener 12 L in a 18.9 L pail K05400105-30 K05400125-30 K05400145-30 K05400185-30 * For Colour Selections, see Pages 38-40. Can be tinted using Color-On-Demand. See Page 41 for details. 25 CUSTOMER SERVICE Phone: 866-736-1486 Fax: 800-243-3075 www.KPG-Industrial.com http://www.kpg-industrial.com/products/waterbased_acrylic_floor_coating_k0500_series/ http://www.kpg-industrial.com/products/duratop_epoxy_floor_coating_k0540_series/ http://www.kpg-industrial.com/products/duratop_epoxy_floor_coating_k0540_series/ http://www.kpg-industrial.com/products/waterbased_acrylic_floor_coating_k0500_series/ http://www.kpg-industrial.com/products/duratop_epoxy_floor_coating_k0540_series/ http://www.KPG-Industrial.com
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.