Krylon Canadian Product Guide 2008 - English - (Page 26) FLOOR PRODUCTS Epoxy Flooring Compound Patch Kit Epoxy Flooring Compound Patch Kit is a trowelable epoxy surfacing and leveling compound for new and old floors of concrete, wood or steel where a high degree of chemical and abrasion resistance is required. • COV: 0 g/L (0.00 lb/gal) • Excellent abrasion and impact resistance • Recommended for high traffic areas • A 100% reactive epoxy system formulated to conform to present OSHA requirements for mixing, handling and usage • Designed for use where a durable, sanitary, chemical resistant anti-skid floor is required Recommended Uses: As a high build epoxy floor resurfacer in a variety of industries, including food processing, such as dairies, bakeries, breweries, bottling plants and packing houses; chemical process and refinery industries; industrial plants; and utilities, such as sewage and water treatment plants, and generating stations Epoxy Flooring Compound Patch Kit 2.5 sq.-m per kit K05100006-99 Flexible Joint Sealant Flexible Joint Sealant is a two-component polymer hybrid containing both urethane and epoxy resins. • COV: 0 g/L (0.00 lb/gal) • Provides a resilient filler for expansion joints • Has excellent flexural strength and elongation while maintaining impressive tensile strength • Has good adhesive strength and flexibility over a wide temperature range • Helps prevent damage to the joint and its edges Recommended Uses: A filler and sealer for narrow masonry controls, joints and grooves Flexible Joint Sealant Parts A + B 3.78 L kit K05100003-99 Epoxy Primer/Sealer Epoxy Primer/Sealer is a clear, low viscosity epoxy primer designed for use under Dura-Top® or where a high build primer is needed. • COV: 0 g/L (0.00 lb/gal) • Fast curing • Enhances adhesion by penetrating into the concrete substrate • Helps reduce the bubbling and pinholes that occur when coating porous surfaces with high build coatings Recommended Uses: For use over prepared concrete or wood surfaces as a high build primer/sealer that is ideal for use on porous concrete or over a rough surface profile in industrial, commercial and marine applications Epoxy Primer/Sealer Clear - Parts A + B Clear (Part A) Clear (Part B) 3.78 L kit K05101001-99 11.4 L K05101000-30 K05109017-16 3.78 L 26 http://www.kpg-industrial.com/products/epoxy_flooring_compound_patch_kit_k0510_series/ http://www.kpg-industrial.com/products/flexible_joint_sealant_k0510_series/ http://www.kpg-industrial.com/products/epoxy_primersealer_k0510_series/ http://www.kpg-industrial.com/products/epoxy_primersealer_k0510_series/ http://www.kpg-industrial.com/products/flexible_joint_sealant_k0510_series/ http://www.kpg-industrial.com/products/flexible_joint_sealant_k0510_series/ http://www.kpg-industrial.com/products/epoxy_primersealer_k0510_series/
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.