Krylon Ozone Transport Commission Product Guide 2008 - (Page 11) High Solids Polyurethane (K0410 Series) High Solids Polyurethane is a two-component, aliphatic, acrylic polyurethane resin coating. It is designed for high performance protection with outstanding exterior gloss and color retention. Offers excellent corrosion and chemical resistance. Recommended Uses: For use over prepared substrates in industrial environments requiring chemical and abrasion resistance. Can be used on the exterior of steel tanks, chemical processing equipment in marine and oil field environments. Can also be used in power plants, paper mills, clean rooms, and food processing plants. VOC: <66g/L (0.81 lb/gal) mixed, unreduced OTC Category: Industrial Maintenance, <340 g/L (2.83 lb/gal) KRYLON® INDUSTRIAL TOPCOATS Fast Cure Epoxy (K0370 Series) Fast Cure Epoxy is a two-component coating. It is low odor, chemical resistant, abrasion resistant, high solids, high build, fast drying, polyamide epoxy designed to protect steel and concrete in an industrial environment. Recommended Uses: For use on parts with sharp edges, corners, and welds in fabrication shops, pulp and paper mills, power plants, offshore platforms, water treatment plants and refineries. May be used in a good processing plant. Not suitable for potable water. VOC: <100g/L (0.83 lb/gal) OTC Category: Industrial Maintenance, <340 g/L (2.83 lb/gal) OTC PRODUC T GUIDE 11 http://www.kpg-industrial.com/products/high_solids_polyurethane_k0410_series/ http://www.kpg-industrial.com/products/high_solids_polyurethane_k0410_series/ http://www.kpg-industrial.com/products/fast_cure_epoxy_k0370_series/ http://www.kpg-industrial.com/products/fast_cure_epoxy_k0370_series/
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.