Krylon Ozone Transport Commission Product Guide 2008 - (Page 9) Water Reducible Alkyd Enamel (K0960 Series) Water Reducible Alkyd Enamel is a fast drying, waterreducible, acrylic modified, alkyd coating intended for industrial product finishing and refinishing applications. Its low VOC, the reduced hazards of water reducible technology and versatility of application, make it an ideal coating for a wide array of general metal applications. Recommended Uses: For use over prepared substrates in industrial environments. VOC: 336 g/L (2.80 lbs/gal) OTC Category: Industrial Maintenance, <340 g/L (2.83 lbs/gal) KRYLON® INDUSTRIAL TOPCOATS Water-Based Epoxy (K0244 Series) Water-Based Epoxy is a high performance, catalyzed epoxy coating for interior or exterior use in light-moderate commercial, institutional, and industrial environments. NOTE: This is a two-component system, do not use without a hardener. Recommended Uses: For use over prepared substrates such as steel, aluminum, and concrete in industrial environments: tile-like wall coatings, interior institutional/ commercial high maintenance areas, upgrade surfaces painted with conventional coatings to a high, performance protection system without lifting and bleeding, low odor/no shutdown sanitary coating systems, hospitals, schools, pharmaceutical houses, exterior storage tanks, institutional kitchens and manufacturing equipment. VOC (Catalyzed): 180 g/L (1.51 lb/gal) OTC Category: Industrial Maintenance, <340 g/L (2.83 lbs/gal) OTC PRODUC T GUIDE 9 http://www.kpg-industrial.com/products/waterreducible_alkyd_enamel_96_series/ http://www.kpg-industrial.com/products/waterreducible_alkyd_enamel_96_series/ http://www.kpg-industrial.com/products/waterbased_epoxy_k0244_series/ http://www.kpg-industrial.com/products/waterbased_epoxy_k0244_series/
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.