Miller Edge eCatalog - 12
MU21_Spec_20140819.qxp_ME123 10/23/15 3:32 PM Page 2
Model # MU21
To install remove edge from shipping container and lay
out flat and straight. Close air valve. Position edge in
desired location and attach with screws through mounting flange at ends and center. Continue to attach edge
by securing mounting flange with screws placed 24"
apart. Do not place screws below seal line. For detailed
installation & wiring instructions, contact MillerEdge, Inc.
Care of the MU21. . .
Minimal care is required for MU style Sensing Edges
since they are manufactured with only the most
durable materials and the highest quality control standards. However, Sensing Edges should be examined
regularly for cuts or punctures which could damage internal components. Check wiring to be sure connections are secure. When properly maintained, the MU21
offers years of trouble-free operation.
We will replace within one year of shipment from our
factory, any Sensing Edge subject to normal use which
is found to have defective materials or workmanship,
as determined solely by our factory representative. Replacements will be shipped to you freight collect. This
warranty is void where evidence of misuse or abuse is
Contact Miller Edge to ensure compatability with your operating controls.
U.S. Patent #5,962,825 & #8,832,996 B2 CAN. Patent #2,008,021
P.O. Box 159 * West Grove, PA 19390 * (610)869-4422 * Fax: (610)869-4423 * 800-220-3343
6809 South Harl Avenue, Suite A, Tempe, AZ 85283 * (480)755-3565 * Fax (480)755-3558 * 800-887-3343