Miller Edge eCatalog - 18
ME103_Spec_20151015.qxp_ME123 10/20/15 2:37 PM Page 2
Slide the ME103 Sensing Edge into channel. To attach
mounting channel, place in desired location. Drill 1/8"
holes through channel and into mountingsurface.
Secure with screws.
Miller Edge, Inc. will replace within one year of
shipment from factory, any Sensing Edge subject to
normal use, which is found to have defective materials
or workmanship, as determined solely by our factory
representative. Replacements will be shipped to you
freight collect. This warranty is void where evidence
of misuse or abuse is present.
Note: For safe operation, use a maximum 24 volt,
1/2 amp AC or DC power. For detailed installation and
wiring instructions, contact Miller Edge.
CARE & MAINTENENCE
Minimal care is required for the ME103 since it is
manufactured with only the most durable materials
and the highest quality control standards. However,
Sensing Edges should be examined regularly for
cuts or punctures, which could damage internal
components. Check wiring to be sure connections are
secure. When properly maintained, the ME103
offers years of trouble-free operations.
Contact Miller Edge to ensure compatability with your operating controls.
U.S. Patent #5,962,825 & #8,832,996 B2 CAN. Patent #2,008,021
P.O. Box 159 * West Grove, PA 19390 * 610-869-4422 * Fax: 610-869-4423 * 800-220-3343
6809 South Harl Avenue, Suite A * Tempe, AZ 85283 * 480-755-3565 * Fax: 480-755-3558 * 800-887-3343