Miller Edge eCatalog - 20
ME110_Spec_20151015.qxp_Spec Sheet Template 10/23/15 11:47 AM Page 2
Place appropriate ME110 mounting channel in desired
location. Drill 1/8" holes through channel and into
mounting surface every 24". Attach channel to surface
with screws. Slide ME110 Sensing Edge into channel and
wire to controls.
Miller Edge, Inc. will replace within one year of
shipment from factory, any Sensing Edge subject to
normal use, which is found to have defective materials
or workmanship, as determined solely by our factory
representative. Replacements will be shipped to you
freight collect. This warranty is void where
evidence of misuse or abuse is present.
Note: Use 12-24 volt, 1/2 amp AC/DC power. Overload
can cause damage. For detailed installation and wiring
instructions, contact Miller Edge.
CARE & MAINTENENCE
Minimum care is required for the ME110 since it is
manufactured with only the most durable materials
and the highest quality control standards. However,
Sensing Edges should be examined regularly for cuts or
punctures, which could damage internal components.
Check wiring to be sure connections are secure. When
properly maintained, the ME110 offers years of troublefree operation.
Contact Miller Edge to ensure compatability with your operating controls.
U.S. Patent #5,962,825 & #8,832,996 B2 CAN. Patent #2,008,021
P.O. Box 159 * West Grove, PA 19390 * 610-869-4422 * Fax: 610-869-4423 * 800-220-3343
6809 South Harl Avenue, Suite A * Tempe, AZ 85283 * 480-755-3565 * Fax: 480-755-3558 * 800-887-3343