Miller Edge eCatalog - 22
Place appropriate ME111 mounting channel in desired
location. Drill 1/8" holes through channel and into
mounting surface every 24". Attach channel to surface
with screws. Slide ME111 Sensing Edge into channel
and wire to controls.
Note: For safe operation, use a maximum 24 volt,
1/2 amp AC/DC power. Overload can cause damage.
For detailed installation instructions contact Miller Edge.
CARE & MAINTENENCE
Minimal care is required for the ME111 since it is
manufactured with only the most durable materials
and the highest quality control standards. However,
Sensing Edges should be examined regularly for
cuts or punctures, which could damage internal
components. Check wiring to be sure connections are
secure. When properly maintained, the ME111 offers
years of trouble-free operations.
Miller Edge, Inc. will replace within one year of
shipment from factory, any Sensing Edge subject to
normal use, which is found to have defective
materials or workmanship, as determined solely by
our factory representative. Replacements will be
shipped to you freight collect. This warranty is void
where evidence of misuse or abuse is present.
Contact Miller Edge to ensure compatability with your operating controls.
U.S. Patent #5,962,825 & #8,832,996 B2 CAN. Patent #2,008,021
P.O. Box 159 * West Grove, PA 19390 * 610-869-4422 * Fax: 610-869-4423 * 800-220-3343
6809 South Harl Avenue, Suite A * Tempe, AZ 85283 * 480-755-3565 * Fax: 480-755-3558 * 800-887-3343