Miller Edge eCatalog - 24
Place ME112 channel in desired location. Drill 1/8"
holes through channel and into mounting surface every
24". Slide ME112 Sensing Edge into mounting channel.
Attach channel to surface with screws. Wire the ME112
Miller Edge, Inc. will replace within one year of
shipment from factory, any Sensing Edge subject to
normal use, which is found to have defective
materials or workmanship, as determined solely by our
factory representative. Replacements will be shipped
to you freight collect. This warranty is void where
evidence of misuse or abuse is present.
Note: For safe operation, use a maximum 24 volt, 1/2
amp AC or DC power. For detailed installation and
wiring instructions, contact MillerEdge.
CARE & MAINTENENCE
Minimal care is required for the ME112 since it is
manufactured with only the most durable materials
and the highest quality control standards. However,
Sensing Edges should be examined regularly for
cuts or punctures, which could damage internal
components. Check wiring to be sure connections are
secure. When properly maintained, the ME112 offers
years of trouble-free operations.
Contact Miller Edge to ensure compatability with your operating controls.
U.S. Patent #5,962,825 & #8,832,996 B2 CAN. Patent #2,008,021
P.O. Box 159 * West Grove, PA 19390 * 610-869-4422 * Fax: 610-869-4423 * 800-220-3343
6809 South Harl Avenue, Suite A * Tempe, AZ 85283 * 480-755-3565 * Fax: 480-755-3558 * 800-887-3343