Miller Edge eCatalog - 26
Place appropriate ME113 mounting channel in desired
location. Drill 1/8" holes through channel and into
mounting surface every 24". Slide ME113 Sensing Edge
into channel. Attach channel to surface with screws
and wire to controls.
Miller Edge, Inc. will replace within one year of shipment from factory, any Sensing Edge subject to normal use, which is found to have defective materials or
workmanship, as determined solely by our factory representative. Replacements will be shipped to you
freight collect. This warranty is void where evidence
of misuse or abuse is present.
Note: For safe operation, use a maximum 24 volt, 1/2
amp AC/DC power. Overload can cause damage.
For detailed installation instructions, contact Miller Edge.
CARE & MAINTENENCE
Minimal care is required for the ME113 since it is
manufactured with only the most durable materials
and the highest quality control standards. However,
Sensing Edges should be examined regularly for
cuts or punctures, which could damage internal
components. Check wiring to be sure connections are
secure. When properly maintained, the ME113 offers
years of trouble-free operations.
Universal End Plugs and Flaps
Contact Miller Edge to ensure compatability with your operating controls.
U.S. Patent #5,962,825 & #8,832,996 B2 CAN. Patent #2,008,021
P.O. Box 159 * West Grove, PA 19390 * 610-869-4422 * Fax: 610-869-4423 * 800-220-3343
6809 South Harl Avenue, Suite A * Tempe, AZ 85283 * 480-755-3565 * Fax: 480-755-3558 * 800-887-3343