Miller Edge eCatalog - 30
Model # ME117
Slide the ME117 Sensing Edge into proper channel.
To attach mounting channel, place in desired location.
Drill 1/8" holes through channel and into mounting
surface. Secure with screws.
Miller Edge, Inc. will replace within one year of
shipment from factory, any Sensing Edge subject to
normal use which is found to have defective
materials or workmanship, as determined solely by
our factory representative. Replacements will be
shipped to you freight collect. This warranty is void
where evidence of misuse or abuse is present.
Note: For safe operation, use a maximum 24 volt, 1/2
amp AC or DC power. For detailed installation and
wiring instructions, contact Miller Edge.
CARE & MAINTENENCE
Minimal care is required for the ME117 since it is
manufactured with only the most durable materials
and the highest quality control standards. However,
Sensing Edges must be examined regularly for cuts
or punctures, which could damage internal
components. Check wiring to be sure connections are
secure. When properly maintained, the ME117
offers years of trouble-free operations.
Contact Miller Edge to ensure compatability with your operating controls.
U.S. Patent #5,962,825 & #8,832,996 B2 CAN. Patent #2,008,021
P.O. Box 159 * West Grove, PA 19390 * 610-869-4422 * Fax: 610-869-4423 * 800-220-3343
6809 South Harl Avenue, Suite A * Tempe, AZ 85283 * 480-755-3565 * Fax: 480-755-3558 * 800-887-3343