Miller Edge eCatalog - 32
Model: ME120, MGO20
Place mounting channel in desired location. Drill 1/8"
holes through channel into mounting surface every 24".
Attach channel to mounting surface. Slide Sensing Edge
into mounting channel. If mounting in vertical position,
use a screw at the bottom of the channel as a
mechanical stop to prevent Sensing Edge from
slipping out of position. For detailed instructions,
contact Miller Edge.
Note: For safe operation, use maximum 24 volt AC or DC
CARE & MAINTENENCE
Minimal care is required for ME120 and MGO20
since they are manufactured with only the most
durable materials and the highest quality control
standards. However, Sensing Edges should be
examined regularly for cuts or punctures, which could
damage internal components. Check wiring to be sure
connections are secure. When properly maintained,
both the MGR20 and the MGS20 offer years of troublefree operation.
Miller Edge, Inc. will replace within one year of shipment
from factory, any Sensing Edge subject to normal use
which is found to have defective materials or
workmanship, as determined solely by our factory
representative. Replacements will be shipped to
you freight collect. This warranty is void where
evidence of misuse or abuse is present.
Contact Miller Edge to ensure compatability with your operating controls.
U.S. Patent #5,962,825 & #8,832,996 B2 CAN. Patent #2,008,021
P.O. Box 159 * West Grove, PA 19390 * 610-869-4422 * Fax: 610-869-4423 * 800-220-3343
6809 South Harl Avenue, Suite A * Tempe, AZ 85283 * 480-755-3565 * Fax: 480-755-3558 * 800-887-3343