Miller Edge eCatalog - 34
Slide ME123 Sensing Edge into proper channel. To attach
mounting channel, place in desired location. Drill 1/8" holes
through channel and into mounting surface. Secure with
Note: For safe operation, use a maximum 24 volt, 1/2
amp AC or DC power. For detailed installation and wiring
instructions, contact Miller Edge.
Miller Edge, Inc. will replace within one year of
shipment from factory, any Sensing Edge subject to
normal use, which is found to have defective materials
or workmanship, as determined solely by our factory
representative. Replacements will be shipped to you
freight collect. This warranty is void where evidence
of misuse or abuse is present.
CARE & MAINTENENCE
Minimal care is required for the ME123 since it is
manufactured with only the most durable materials and
the highest quality control standards. However, Sensing
Edges must be examined regularly for cuts or punctures,
which could damage internal components. Check wiring to
be sure connections are secure. When properly maintained,
the ME123 offers years of trouble-free operations.
WIRE OUTLET LOCATIONS
Contact Miller Edge to ensure compatability with your operating controls.
U.S. Patent #5,962,825 & #8,832,996 B2 CAN. Patent #2,008,021
P.O. Box 159 * West Grove, PA 19390 * (610)869-4422 * Fax: (610)869-4423 * 800-220-3343
6809 South Harl Avenue, Suite A, Tempe, AZ 85283 * (480)755-3565 * Fax (480)755-3558 * 800-887-3343