Miller Edge eCatalog - 40
Place appropriate CPT-210 mounting channel in
desired location. Drill 1/8" holes through channel and
into mounting surface every 24". Attach channel to
surface with screws. Slide CPT-210 Sensing Edge into
channel and wire to controls.
Note: For detailed installation and wiring instructions,
contact Miller Edge.
Miller Edge, Inc. will replace within two years of
shipment from factory, any Sensing Edge subject
to normal use, which is found to have defective
materials or workmanship, as determined solely by our
factory representative. Replacements will be
shipped to you freight collect. This warranty is
void where evidence of misuse or abuse is
CARE & MAINTENENCE
Minimum care is required for the CPT-210 since it is
manufactured with only the most durable materials
and the highest quality control standards. However,
Sensing Edges should be examined regularly for cuts or
punctures, which could damage internal components.
Check wiring to be sure connections are secure. When
properly maintained, the CPT-210 offers years of
trouble free operation.
Contact MillerEdge to ensure compatability with your operating controls.
U.S. Patent #8,832,996 B2 #9,091,108
CPT-210 End Plug
P.O. Box 159 * West Grove, PA 19390 * 610-869-4422 * Fax: 610-869-4423 * 800-220-3343
6809 South Harl Avenue, Suite A * Tempe, AZ 85283 * 480-755-3565 * Fax: 480-755-3558 * 800-887-3343