Miller Edge eCatalog - 8
MT21_Spec_20140819_ME123 10/26/15 10:20 AM Page 2
Model # MT21
To install remove edge from shipping container and lay out
flat and straight. Close air valve. Position edge in desired
location and attach with screws through mounting flange at
ends and center. Continue to attach edge by securing mounting flange with screws placed 24" apart. Do not place screws
below seal line. For detailed installation & wiring instructions,
contact MillerEdge, Inc.
Care of the MT21. . .
Minimal care is required for MT style Sensing Edges since
they are manufactured with only the most durable
materials and the highest quality control standards. However, Sensing Edges should be examined regularly for cuts
or punctures which could damage internal components.
Check wiring to be sure connections are secure. When
properly maintained, the MT21 offers years of trouble-free
We will replace within one year of shipment from
our factory, any Sensing Edge subject to normal
use which is found to have defective materials or
workmanship, as determined solely by our factory
representative. Replacements will be shipped to
you freight collect. This warranty is void where evidence of misuse or abuse is present.
Contact Miller Edge to ensure compatability with your operating controls.
U.S. Patent #5,962,825 & #8,832,996 B2 CAN. Patent #2,008,021
P.O. Box 159 * West Grove, PA 19390 * (610)869-4422 * Fax: (610)869-4423 * 800-220-3343
6809 South Harl Avenue, Suite A, Tempe, AZ 85283 * (480)755-3565 * Fax (480)755-3558 * 800-887-3343