Radio World - April 8, 2009 - (Page 4) 4 Radio World | radioworld.com NEWS April 8, 2009 FROM THE EDITOR Clear Channel Packs Its Own Chute Steve Davis Talks About the Company’s National VSAT ‘Safety Net’ for Radio by Paul J. McLane Steve Davis, the senior vice president of engineering for Clear Channel Radio, will present a paper during the NAB Show’s Broadcast Engineering Conference on the company’s new “National VSAT Safety Net.” I asked him for details in an e-mail exchange. What is a national VSAT safety net? This is a satellite-based backup system that connects our studios and tower sites via VSAT (Very Small Aperture Terminal) Ku band uplinks and downlinks, configured so we can send data and audio. What prompted this project at Clear Channel and who led the work to implement it? The project was prompted primarily by Hurricane Katrina. We had to assemble an “ad hoc” system to get our audio programming out to our tower sites with STL towers and dishes knocked down, and at times needed a backup to our WAN data connection. I led the rollout project, but John Hogan, our CEO, directed us to do something to improve our disaster readiness. Allan Brace and Mike Sanchez were instrumental partners in rolling this out. Satellite Operations Center IP Enabled Programmable Controller IP Audio Streamer Secondary Audio Program Switcher Transmitter Site SaTL IP Enabled Facility Control Radio Broadcast Equipment nected to a decoder to convert the data back to audio. There is a remote-controllable switcher at each transmitter site that can be commanded over to this backup audio source in lieu of the traditional or even backup delivery channel. The dish is aimed using a Birdog device. On the national side, we did a study of power and dish size needed for reliability across the U.S. We determined that to get the transmit bandwidth needed for studio WAN connectivity for multiple stations, we’d need a 6 watt BUC (transmitter). At the transmitter sites that are primarily down linking data, only a 2W BUC was needed. Studies showed that a .98 meter dish would work in most of the U.S., with a 1.5 meter dish being needed in certain latitudes. We designed our own switch box controlled by an IP-addressable controller. The studio units are connected to the facility’s core switch. What did it cost? The cost is about $3,200 per site, depending on specific options. If an engineering manager wants to do something similar, any tips or pitfalls to avoid? The pitfalls are basically the same as with any satellite installation: You need an unobstructed view of the satellite and a reliable, sturdy mount. More details will be presented in the session. Normal program link (Primary Audio) STL Studio SaTL IP Audio Streamer Audio Program Source NetworkOperations Center Studio LAN You talk in the session summary about how this was What lesson should radio managers take from Studio Core Switch prompted by problems of loss of WAN connectivity, this experience? Information Technology loss of audio and loss of site control. Do such probWe haven’t learned many lessons from Router lems happen often? Under what circumstances? installation of this network per se. Rather, lesJust today (March 13) we lost our STL in Ft. Diagram of the SaTL connection. Steve Davis said, ‘In our widespread sons learned from many hurricanes, floods, Myers, Fla. We were able to stay on the air by blackouts, power outages and just plain equipoperation we find ourselves falling back on this about once using this system. ment failures showed us the necessity of havevery other week somewhere, for a few hours to a week or more.’ We lose our land lines (WAN connectivity) ing a completely separate, alternate delivery from time to time due to “backhoe fade” as well as storms ny to transit data regularly? path to maintain connectivity in today’s environment, and other larger problems. The cause can be interference, It is for backup/disaster readiness purposes only. The where connectivity is so essential. a bad STL transmitter or receiver, a fallen dish or dish existing land lines and STL systems are usually more effiSome of our stations rely on land lines, such as T1s, to blown off aim, loss of power to a switch or CO (in the case cient in terms of cost for the bandwidth. convey audio to tower sites. It is a terrible feeling to be sitof T1s and other land lines), etc. ting helpless while the station is off the air! This gives us In our widespread operation we find ourselves falling Technically, what was involved in setting this up? one way to take control of that situation. In essence we are back on this about once every other week somewhere, for Setting up the network from the market side consists of “packing our own chute.” a few hours to a week or more. mounting and locating a small dish and connecting it to a Satellite Information Terminal, or SIT. On the studio end, Davis will speak Wednesday morning, April 22, as Is this infrastructure layer specifically for backup purpos- this is connected to an encoder so audio can be fed into the part of the “Disaster Preparedness & Public Alerting” es only? Or does it now provide a new way for the compa- system as data; at the transmitter end, the SIT output is con- presentations. Get the listening credit you deserve. Trust PPM™ Assurance from Burk Technology. N N N N Available Now Identifies true cause of encoding loss and immediately activates backup equipment Built-in validation makes sure you broadcast the right code Integrated silence sensing identifies encoding loss due to silence Features onboard web server and email notifications Take control of your PPM investment. Contact Burk or your favorite dealer to learn more. WWW.BURK.COM Arbitron PPM™ is a trademark of Arbitron, Inc. http://www.radioworld.com http://WWW.BURK.COM http://WWW.BURK.COM
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.