tS
Screen Printing Technique
STEP 9.
After taping off the screen, be sure to set the off-contact on your press to about twice as high as you normally would so you won’t smash the high-density ink when printing. Make sure you have a thick flood so there is enough ink to fill the stencil opening.
Use Info•Action #29 at impressionsmag.com/infoaction See us at ISS Long Beach
STEP 10.
You will hardly need to apply any pressure to the squeegee when you actually make the pass. Remember, you’re printing through an 83 mesh, so the ink will flow like silk through the screen.
Use Info•Action #30 at impressionsmag.com/infoaction
72
Impressions | January 2013
impressionsmag.com
http://WWW.AGPESOLUTIONS.COMhttp://WWW.AGPESOLUTIONS.COMhttp://www.impressionsmag.com/infoactionhttp://www.impressionsmag.com/infoactionhttp://www.impressionsmag.com
Table of Contents for the Digital Edition of Impressions - January 2013