Parts Express Sales Flyer - November 5, 2008 - (Page 23)

Pro Audio B&C’s primary focus is high quality loudspeakers, high frequency drivers, and horns for the audio marketplace. Dayton Audio PK165-8 6" Kevlar/Paper Midrange Dayton Audio’s PK165-8 provides high output, extended frequency response, and low distortion— perfect for use in compact full range applications as well as a separate component in multi-way speaker systems. The PK165-8 features a steel frame, Kevlar-impregnated paper cone, treated cloth surround, vented pole piece, and a 1-1/2" aluminum voice coil wound on a polyimide former. Speciﬁcations: • Power handling: 100 watts RMS/150 watts max • VCDIA: 1-1/2" • Impedance: 8 ohms • Re: 7 ohms • Frequency range: 95 - 9,000 Hz • Fs: 95 Hz • SPL: 93 dB 2.83V/1m • VAS: 0.31 cu. ft. • QMS: 8.82 • QES: 0.64 • QTS: 0.59 • Dimensions: A: 6-1/2", B: 5-5/8", C: 3". B&C DE250-8 1" Compression Driver • 120 watt continuous program power capacity • 1.7" aluminum voice coil • Polyimide diaphragm • 108.5 dB sensitivity • 1" bolt-on format (2-bolt/3-bolt) 1" high frequency compression driver with smooth and accurate response. Low mass polyimide diaphragm and optimized ceramic magnet assembly allow high sensitivity and low distortion up to 18 kHz. Speciﬁcations: • Power handling: 60 watts RMS/120 watts program above recommended crossover of 1.6 kHz/12 dB slope • VCDIA: 1.7" • Impedance: 8 ohms • Frequency response: 1,000-18,000 Hz • SPL: 108.5 dB 1W/1m • Dimensions: 4.7" diameter x 2.4" depth • Net weight: 4.6 lbs. • Replacement diaphragm available. Regularly #295-020 $38.99LIST $2990(1-3) $2847(4-UP) Dayton Audio PF385-8 15" Professional Sound Driver Designed with extra excursion capability to deliver maximum bass impact. Speciﬁcations: • Power handling: 500 watts RMS/700 watts max • VCDIA: 4" • Le: 1.71 mH • Impedance: 8 ohms • Re: 6.2 ohms • Frequency range: 35-2,000 Hz • Magnet weight: 109 oz. • Fs: 36 Hz • SPL: 97 dB 1W/1m • VAS: 7.04 cu. ft.• QMS: 8.85 • QES: .39 • QTS: .37 • XMAX: 6 mm • Dimensions: A: 15-1/4", B: 14", C: 6-1/2". #294-605 $200.27LIST $15120 $13000EACH B&C 10MD26 10" Midbass Very high efﬁciency 10" cone midrange, excellent choice for front horn loading up to 2.5 kHz. Speciﬁcations: • Power handling: 350 watts RMS • VCDIA: 3" • Le: 1.2 mH • Impedance: 8 ohms • Re: 5.8 ohms • Frequency response: 80-4000 Hz • Fs: 76 Hz • SPL: 100 dB 1W/1m • VAS: 0.71 cu. ft. • QMS: 4.8 • QES: 0.22 • QTS: 0.21 • XMAX: 1.5 mm • Dimensions: A: 10.2", B: 8.8", C: 4.9". #295-080 $203.99LIST $15668 Regularly $14000EACH Dayton Audio PF460-8 18" Professional Sound Driver Regularly #294-658 $255.62LIST $17663 $15000EACH Works equally well in sealed, vented, or horn-loaded applications. • Power handling: 500 watts RMS/700 watts max • VCDIA: 4" • Le: 2 mH • Impedance: 8 ohms • Re: 6.7 ohms • Frequency range: 25-1,500 Hz • Magnet weight: 109 oz. • Fs: 25 Hz • SPL: 97 dB 1W/1m • VAS: 16.12 cu. ft. • QMS: 6.74 • QES: .36 • QTS: .34 • XMAX: 6 mm • Dimensions: A: 18", B: 16-1/2", C: 8-1/4". Speciﬁcations: B&C 21SW150 21" Neodymium Subwoofer 4 Ohm • 3,000 watt continuous program power capacity • 6" diameter, 1" long copper voice coil wound on glass ﬁber former • 15 mm Xmax, 60 mm peak-to-peak excursion before damage • Neodymium ring magnet allows a very high force factor and linear excursion • Ventilated voice coil gap for reduced power compression • Aluminum demodulating ring decreases distortion B&C’s 21SW150 features a massive 260 square inches of diaphragm surface area, nearly 40% more than an 18" driver and equal to double the Sd of a typical 15". The 21SW150 will deliver nearly unmatchable low frequency output when loaded into vented or horn loaded enclosures. Speciﬁcations: • Power handling: 1,500 watts RMS, 3,000 watts continuous program • VCDIA: 6" • Le: 1.3 mH • Impedance: 4 ohms • Re: 3.3 ohms • Frequency response: 30-1,000 Hz • Fs: 29 Hz • SPL: 95 dB 1W/1m • VAS: 8.9 cu. ft. • QMS: 8.1 • QES: 0.27 • QTS: 0.26 • XMAX: 15 mm • Dimensions: A: 21.5" B: 20" C: 8.2" Regularly #295-085 $245.99LIST $18909 $16000EACH 12" Cast Frame Coaxial Pro Speaker • Concentric dual-driver design for great point source output • High sensitivity and 90° nominal coverage • Use with passive or active crossover (not included) • Passive crossover design available Great for public address, theater ﬁlls, stage monitors, full range musical instrument systems, and general sound reinforcement. Factory buyout— limited quantities. Speciﬁcations: • Power handling: (LF) 150 watts RMS/300 watts continuous program, (HF) 25 watts RMS/50 watts continuous program • VCDIA: (LF) 2", (HF) 1-3/8" • Le: 0.86 mH • Impedance: 8 ohms • Re: 5.6 ohms • Frequency response: 60-18,000 Hz • Fs: 68 Hz • SPL: (LF) 95 dB, (HF) 100 dB 1W/1m • VAS: 0.65 cu. ft. • QMS: 12.61 • QES: 0.79 • QTS: 0.75 • XMAX: 2.5 mm • Dimensions: A: 12.4" B: 11.2" C: 7". Compare To $249.99 #299-450 #294-690 $1,180.82LIST $78171(1-3) $75595(4-UP) $9850EACH 23 parts-express.com Free Shipping on Orders Over $49* http://www.partsexpress.com/webpage.cfm?&DID=7&WebPage_ID=27&sf=08g-023 http://www.parts-express.com/pe/pshowdetl.cfm?&partnumber=295-020&sf=08g-23&destination=295-020 http://www.parts-express.com/mfg/daytonaudio/dayton-audio.cfm?&sf=08g-23&destination=dayton-audio http://www.parts-express.com/mfg/bcaudio/b-and-c-audio.cfm?&sf=08g-23&destination=bcaudio http://www.parts-express.com/pe/pshowdetl.cfm?&partnumber=294-605&sf=08g-23&destination=294-605 http://www.parts-express.com/pe/pshowdetl.cfm?&partnumber=295-080&sf=08g-23&destination=295-080 http://www.parts-express.com/pe/pshowdetl.cfm?&partnumber=294-658&sf=08g-23&destination=294-658 http://www.parts-express.com/pe/pshowdetl.cfm?&partnumber=295-085&sf=08g-23&destination=295-085 http://www.parts-express.com/pe/pshowdetl.cfm?&partnumber=294-690&sf=08g-23&destination=294-690 http://www.parts-express.com/pe/pshowdetl.cfm?&partnumber=299-450&sf=08g-23&destination=299-450 http://www.partsexpress.com/webpage.cfm?&DID=7&WebPage_ID=56&sf=08g-023

Table of Contents Feed for the Digital Edition of Parts Express Sales Flyer - November 5, 2008

Parts Express Sales Flyer - November 5, 2008 Contents Home Audio/Video Parts & Accessories Speaker Building Pro Audio Car Audio

Parts Express Sales Flyer - November 5, 2008

For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.