Phenomenex Catalog International 2009 - (Page 79) GC Accessories Septa Parts for Agilent Technologies (HP) GC Systems Silicone Rubber Inlet Septa • Advanced silicone formulations reduce coring and increase septum lifetime • Enhanced durability and re-sealing capabilities PhenoGrey™-250 This general purpose silicone rubber septum is designed for use up to 250 °C for extended periods of time. With a durometer reading of 40-45, septum puncture is easy (fewer bent needles) for up to 100 injections. PhenoBlue™-300 This low-bleed septum is designed from a recent technology advance in the silicone field. Thoroughly tested and evaluated, the high durometer rating of 50-60 guarantees over 100 injections at 300 °C, but is actually heat-stable to 350 °C to give you even greater confidence when the oven heats up! GC COLUMNS & ACCESSORIES PhenoRed™-400 Fire brick red, with a 50 durometer rating, this specially formulated high-temperature, low-bleed silicone rubber septum is designed and conditioned for high sensitivity analysis where the demands for low bleed and heat stability are critical. Say goodbye to ghost peaks! Temperature-rated to 400 °C, even continuous injection port temperatures of 350 °C rarely change this septum's physical properties. Typical injection life is 150 punctures. Available with or without needle GuideRight™ Hole. Septa Sizes by GC Instrument Manufacturer Instrument Model Septa Diameter Agilent (HP) 5850, 5880, 5890, 6850, 6890 5700 series, 5880A 7/16 in. (11 mm) 3/8 in. (9.5 mm) | SEPTA PhenoGreen™-400 Long life, high-temperature green septum, rated to 400 °C. GuideRight™ through-hole to guide the needle during injection. GuideRight™ Injection Hole Septa Choose from either our high-temperature PhenoGreen or our top-performing PhenoRed, both rated to 400 ºC. The GuideRight through-hole guides the needle during injection. Septum performance and lifetime increase while downtime due to bent needles or dirty injection ports decreases. Ordering Information GuideRight Injection Hole Septa Part No. Description PhenoGreen 3/8 in. (9.5 mm) Diameter 400 °C AG0-7874 PhenoGreen™ 400 Injector Septa PhenoGreen 7/16 in. (11 mm) Diameter 400 °C AG0-7875 PhenoGreen™ 400 Injector Septa PhenoRed 3/8 in. (9.5 mm) Diameter 400 °C AG0-7916 PhenoRed™ 400 Injector Septa PhenoRed 7/16 in. (11 mm) Diameter 400 °C AG0-7917 PhenoRed™ 400 Injector Septa Unit 50/pk 50/pk 50/pk 50/pk Price Ordering Information Silicone Rubber Septa Part No. Description PhenoGrey 3/8 in. (9.5 mm) Diameter AG0-4686 PhenoGrey-250 Injector Septa AG0-4687 PhenoGrey-250 Injector Septa PhenoBlue AG0-4688 PhenoBlue-300 Injector Septa AG0-4689 PhenoBlue-300 Injector Septa PhenoRed AG0-4690 PhenoRed-400 Injector Septa AG0-4691 PhenoRed-400 Injector Septa Unit 50/pk 100/pk 50/pk 100/pk 50/pk 100/pk Price Part No. Description PhenoGrey 7/16 in. (11 mm) Diameter AG0-4692 PhenoGrey-250 Injector Septa AG0-4693 PhenoGrey-250 Injector Septa PhenoBlue AG0-4694 PhenoBlue-300 Injector Septa AG0-4695 PhenoBlue-300 Injector Septa PhenoRed AG0-4696 PhenoRed-400 Injector Septa AG0-4697 PhenoRed-400 Injector Septa Unit 50/pk 100/pk 50/pk 100/pk 50/pk 100/pk Price Contact Phenomenex or your local Phenomenex distributor for additional GC products and applications. Phenomenex 79
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.