Phenomenex Catalog International 2009 - (Page 81) GC Accessories Long Ferrules Graphite Ferrules Parts for Agilent Technologies (HP) GC Systems Short Ferrules Ordering Information Vespel/Graphite (85/15 %) Short Ferrules (not for GC/MS), Rated to 350 °C Similar to Part No. Description Mfr. No.* Unit Price 5181-3323 10/pk AG0-7318 Vespel/Graphite (85/15 %) Short Ferrules, 1/16 in. to 0.4 mm (for 0.10 to 0.25 mm ID columns) 5062-3514 10/pk AG0-7319 Vespel/Graphite (85/15 %) Short Ferrules, 1/16 in. to 0.5 mm (for 0.32 ID columns) 5062-3512 10/pk AG0-7320 Vespel/Graphite (85/15 %) Short Ferrules, 1/16 in. to 0.8 mm (for 0.45 to 0.53 mm ID columns) Graphite (100 %) Short Ferrules (not for GC/MS), Rated to 450 °C AG0-7513 Graphite (100 %) 072635 10/pk Short Ferrules, 1/16 in. to 0.5 mm Vespel/Graphite (85/15 %) GC/MS Compatible, Rated to 350 °C 5181-3322 AG0-7321 Vespel/Graphite (85/15 %) GC/MS 10/pk Short Ferrules, 1/16 in. to 0.4 mm (for 0.10 to 0.25 mm ID columns) 5062-3513 10/pk AG0-7322 Vespel/Graphite (85/15 %) GC/MS Short Ferrules, 1/16 in. to 0.5 mm (for 0.32 ID columns) 5062-3511 10/pk AG0-7323 Vespel/Graphite (85/15 %) GC/MS Short Ferrules, 1/16 in. to 0.8 mm (for 0.45 to 0.53 mm ID columns) • High-purity graphite significantly reduces ferrule bleed • Special construction minimizes "flaking" Ordering Information Graphite Ferrules, Rated to 450 °C Part No. Description 0.4 mm Ferrule ID AG0-4698 Graphite Ferrule 1/16 in. to 0.4 mm AG0-4699 Graphite Ferrule 1/16 in. to 0.4 mm 0.5 mm Ferrule ID AG0-4701 Graphite Ferrule 1/16 in. to 0.5 mm AG0-4702 Graphite Ferrule 1/16 in. to 0.5 mm 0.8 mm Ferrule ID AG0-4704 Graphite Ferrule 1/16 in. to 0.8 mm AG0-4705 Graphite Ferrule 1/16 in. to 0.8 mm GC COLUMNS & ACCESSORIES Unit 10/pk 50/pk 10/pk 50/pk 10/pk 50/pk Price | All Vespel containing ferrules should be pre-shrunk in an oven at 250 °C for at least 4 hours prior to use. FERRULES / GC FITTINGS Vespel/Graphite Ferrules (60/40 %) • High quality, improved universal design • Use for most applications, up to 400 °C *Similar to but not always an exact equivalent to the original manufacturer’s product. Ordering Information Vespel/Graphite Ferrules (60/40 %), Rated to 400 °C Part No. Description 0.4 mm Ferrule ID AG0-4707 Vespel/Graphite Ferrule 1/16 in. to 0.4 mm AG0-4708 Vespel/Graphite Ferrule 1/16 in. to 0.4 mm 0.5 mm Ferrule ID AG0-4710 Vespel/Graphite Ferrule 1/16 in. to 0.5 mm AG0-4711 Vespel/Graphite Ferrule 1/16 in. to 0.5 mm 0.8 mm Ferrule ID AG0-4713 Vespel/Graphite Ferrule 1/16 in. to 0.8 mm AG0-4714 Vespel/Graphite Ferrule 1/16 in. to 0.8 mm Unit 10/pk 50/pk 10/pk 50/pk 10/pk 50/pk Price GC Fittings • For capillary column connections to both Agilent injectors and GC detectors (not MS) • Interchangeable with original Agilent nuts Select the correct ferrule for your capillary column as follows: GC Capillary ID (mm) 0.10 to 0.25 0.28 to 0.35 0.45 to 0.53 Ordering Information GC Fittings Part No. AG0-5152 AG0-5153 Description Agilent GC Standard Capillary Nut, 1/16 in. hex stainless steel, uses short Agilent ferrules (1.65 mm length) Agilent GC Deep Well Capillary Nut, 1/16 in. hex stainless steel, uses short Agilent ferrules (2.4 mm length) Similar to Mfr. No.* 5181-8830 5020-8292 Unit 2/pk 2/pk Price Ferrule Hole Size (mm) 0.4 0.5 0.8 NOTE: Other types of ferrules are available upon request, please call. NOTE: For quick and accurate GC installation without burning your fingers, use the Cool-Lock™ Nut. Contact Phenomenex or your local Phenomenex distributor for additional GC products and applications. Phenomenex 81
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.