Chemical Processing - April 2008 - (Page 29)

our worst nightmare? You’re making the first batch of a new formulation on the production line and the results are nothing like what happened in the pilot plant. Fortunately, it seems that sort of thing happens less frequently these days. Nevertheless, mixing scale-up remains — in the opinion of many professionals in the industry — more of an art than a science. Despite an increasing number of theories and equations in the public domain, there really isn’t a golden rule to successful scale-up. The issues involved are so diverse with so many variables that no one rule can be applied. Even classifying the equipment used under the umbrella term “mixer” can be complex. So first, let’s distinguish between an agitator and a mixer. Agitators employed in a vessel to promote heat transfer, maintain bulk movement or provide in-tank uniformity often are considered to be “process aids” rather than mixers. (Pumps in this respect fall into the same classification because their function is merely to move the product rather than to alter it.) In contrast, mixers combine two or more ingredients, bringing about a change in these ingredients during the formation of the end product through several operations that may include particle size reduction, homogenization, emulsification, reaction acceleration and so on — many of these may be occurring at the same time in a single operation; a range of operational or hydrodynamic variables may apply in any given service. For agitators (and pumps), because they’re carrying out relatively simple tasks, it’s possible to forecast with a high degree of certainty the size and configuration of the machine required for a particular application. Technical advances such as Computational Fluid Dynamics (CFD), Laser Doppler Anemometry (LDA) and Particle Induced Velocimetry (PIV) are helping make the task easier. They enable modeling the performance of equipment, even taking into account vessel and impeller geometry, batch size and product characteristics — providing sophisticated and accurate scale-up information without necessarily having to carry out any physical testing. For high shear mixers such as rotor/stator devices the tasks www.chemicalprocessing.com Y are more demanding — for example, forming an emulsion or suspension, reacting two ingredients together, etc. — and, so too, is accounting for the varied operations occurring, often simultaneously. The mixers’ versatility means that more complex factors are involved, making it more difficult to understand and predict what’s going on and what will happen under certain conditions. So, selecting a single criterion as a basis for scale-up calculations is far too simplistic an approach. Scale-up considerations for rotor/stator mixers go beyond just sizing the equipment; selection of workhead or stator screen configuration can significantly impact end results in terms of process times, quality of finished product and so on. In addition, it’s important to consider the physical properties of the materials, for example, whether the rheology of the product is affected by shear forces and changes in temperature. Scaling-up from lab trials to specify the correct production unit requires that all calculations be tempered by experience — it’s this “educated guess” that’s the key to successful scale-up. Going beyond “guessology” With high shear mixers, laboratory scale units tend to closely resemble their production counterparts in design but their >> Crucial testing Figure 1. It’s usually prudent to run trials of materials on lab or production scale units at a vendor facility. April 2008 • 29 http://www.chemicalprocessing.com

Table of Contents Feed for the Digital Edition of Chemical Processing - April 2008

Chemical Processing - April 2008 Contents From the Editor ChemicalProcessing.com Field Notes In Process Energy Saver Compliance Advisor Is It a Tragedy or Comedy for Engineers? Better Understanding Boosts Mixer Scale-up Don't Err With Air Compressors Control Performance Supervision Enhances Revamp Process Puzzler Plant InSites Equipment & Services Product Spotlight/Classifieds Ad Index End Point

Chemical Processing - April 2008

For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.