Plant Services - August 2007 - (Page 12) GARLOCK Garlock MULTI-SWELL™ Delivers on Utility Company’s “Zero Leak Tolerance” Policy One major utility company had chronic leak problems in its turbine’s lube oil and seal oil systems. Flanges and gear pump casing covers were constant sources of leaks, resulting in oil loss and unsightly residue. The company tried various types of expanded PTFE (like engineered ring gaskets, sealants, and sheet forms), but nothing worked. Enter Garlock MULTI-SWELL—self-loading, selfsealing gaskets activated by contact with water or oil. Twice as compressible as standard fiber gaskets, the MULTI-SWELL gaskets were cut and installed easily—and they swelled immediately to ensure a tight, no-drip seal. MULTI-SWELL helped this utility deliver on its “Zero Leak Tolerance” program: the lube oil and seal oil systems have been leak free since the gaskets were installed more than two years ago. For more information, go to www.garlock.com HIGH-PERFORMANCE DYNAMIC SEALS Isn’t it time you take a closer look Does your isolator carry the Garlock® name? Only Garlock Bearing Isolators are designed with a unitizing element and patented Cam-Lock design for long lasting bearing protection. Unlike other isolators that use a simple o-ring, our unitizing element eliminates metal-to-metal contact that can create bearing contaminants such as o-ring fragments and bronze shavings that can lead to premature bearing failure. Our patented Cam-Lock design provides twice the retaining power. GUARDIAN™ Bearing Isolators can be easily installed by hand without the need for tools. They also won’t score the bore which can result in metal shards being released into the housing, damaging costly bearings. The GUARDIAN is also API 610 compliant. For more information go to www.klozure.com GARLOCK Mill Saves Millions with Garlock Sealing Solutions One U.S. mill needed to increase its plant’s efficiency—significantly reducing water consumption and tramp water, and increasing the mean time between repairs (MTBR). Garlock and a local distributor performed a complete rotating equipment audit of over 1,000 pumps and agitators, and determined which sealing techniques and products would be the most cost-effective and offer the best return on investment. We identified and eliminated 100 GPM of tramp water—approximately 50 million gallons of water per year—which has saved the mill $750,000 annually. This elimination and several operational improvements helped increase the concentration of black liquor to the recovery boiler by approximately 1 Baume point, which translates into an additional $1,000,000 in estimated annual cost reductions. FLUSH-GARD ® For more on FLUSH-GARD®, visit www.garlock.com World Headquarters: 1666 Division Street, Palmyra, NY 14522 USA 1.800.448.6688 www.garlock.com http://www.garlock.com http://www.klozure.com http://www.garlock.com http://www.garlock.com http://www.garlock.com
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.